KOOGEEK BA Quick Start Manual

Bedwetting alarm

Koogeek

Bedwetting Alarm

Quick Start Guide

1. Working principle and application scope

The product uses the resistance impedance to measure the temperature, and uses the

thermistor to measure the temperature. The MCU would calculate the current temperature and

humidity through the peripheral circuit, and monitor if a bedwetting incident occurs by

comparing with the threshold.

This product is mainly suitable for home use.

• To prevent children from playing with the product, parents are advised to wear the product for

the child after he/she fall asleep.

• Make sure that the probe and probe clip does not come in direct touch with the skin. Sweat

on the skin may cause an alarm.

• Pay attention to the operating temperature and humidity requirements of the product.

Measurement errors may occur if it is used in an environment that does not meet the

requirements.

Do not place the battery where infants and young children can reach out.

Do not put the battery into the fire, or it will cause an explosion.

Do not sterilize or autoclave.

If there is any damage to the probe, stop using the product immediately.

Table of Contents

Do you have a question about the BA and is the answer not in the manual?

Page 1 Do not place the battery where infants and young children can reach out. Do not put the battery into the fire, or it will cause an explosion. Do not sterilize or autoclave. If there is any damage to the probe, stop using the product immediately. How to use the Koogeek app...
Page 2 3. Search "Koogeek" and download the app on a third-party application platform (e.g. App Store / Google Play). 4. Install the Koogeek app. If you are a first-time user, you need to sign up for an account (Note: One registered account supports multiple users).
Page 3 7. The product automatically measures the temperature and humidity in real time and stores the measurements in the app. When urine is detected, it will alert/alarm the user. 8. Stop the alarm: Stop the alarm sound and/or vibration by pressing any button on the alarm unit or just tap in the app.
Page 4 a dry cloth to prevent water from entering the product and damaging the internal electronic components. • When cleaning the sensor and the sensor clip, wipe it with a dry, soft cloth only. • Do not expose this product to strong sunlight, dust, or contaminated environments. Please do not wipe this product with gasoline, volatile oil, diluents, alcohol, and chemical solvents .