Advertisement
Quick Links
Advertisement
Summary of Contents for LAPLACE INSTRUMENTS LETIS
-
Page 1: User Guide
LETIS Laplace EMC Test Integration System User Guide Issue 1.0 May 2005 LAPLACE INSTRUMENTS LTD... -
Page 2: Front Panel
(normally 1GHz) and permit switching between immunity mode and emissions measurement mode. The LETIS is controlled via USB port from the standard RFSynth software provided with the RF1000, RF2000 or RF3000 synthesisers. - Page 3 5. For auto operation and immunity testing, connect the USB cable from the LETIS and the PC. 6. Run the RFSynth software. 7. The LETIS will switch to a power amplifier only when actually running an immunity test. 8. If you need emissions testing, simply close the RFSynth software.
- Page 4 ∗ When in Auto mode, pressing the mode selector switch down will exit Auto mode (green LED turned off) but leave the selected channel unchanged. Therefore use the Up or Down positions to select the required channel. If the switch is used UP to reselect Auto operation, the RFSynth software must be restarted (as described above).
Need help?
Do you have a question about the LETIS and is the answer not in the manual?
Questions and answers