Sharp GX30 User Manual page 76

Press a or b to highlight "Send", then press
7.
select.
The phone begins the sending process and the SMS
is sent. After the message has been sent, the
message is added to the Sent box.
Note
• When you send a message of more than 160
characters, the confirmation message is displayed.
Press A [Yes] to send or C [No] to cancel.
To Add Recipients
to
1.
Perform steps 1 to 6 in "Sending a Message" on
page 74.
Press a or b to highlight "Add Contact", then
2.
press to select.
Press a or b to highlight an item number for
3.
adding recipie
select.
4.
Enter the phone number to add, then press
When adding recipients is complete, press C
5.
[Back].
Follow the procedure from step 7 in "Sending a
Message" on page 74.
Reading SMS
Incoming Messages
The SMS indicator (
message arrives.
1.
When you receive a SMS, press
by.
Press a or b to highlight the message you wish to
2.
view.
The sender's phone number and a part of the
message are displayed. When the sender's phone
nt'
s phone number, then press
) will appear when an incoming
during stand-
Messages
to
.
75