Advertisement

User Manual

Brand : ZANCO
Model : tiny t1
Zini Mobiles Limited

Advertisement

Table of Contents
loading

Summary of Contents for ZANCO tiny t1

  • Page 1: User Manual

    User Manual Brand : ZANCO Model : tiny t1 Zini Mobiles Limited...
  • Page 2 Preface Thank you for choosing our mobile phone! Our mobile phone conforms to the standards of the People's Republic of China's communications industry and meets European standards and is approved for use in GSM networks. GSM network is an international standard global cellular communication system. Your phone can access a variety of international networks, allowing you to make and receive international calls.
  • Page 3 2.1 General precautions Your phone can only use the battery and charger specified by our company. Use of other products may cause the battery to leak, overheat, burst and fire. Do not violently impact, shake or throw the phone, so that the phone failure. Do not place batteries, mobile phones, chargers in microwave ovens or high-voltage equipment, or it may cause damage to the circuit and fire and other accidents.
  • Page 4 Please put a small metal such as a throttle away from the handset. Speakers work with magnetic, will attract these small metal objects, which may cause harm to people or damage the phone. 2.3 Battery Usage Precautions Do not throw the battery into the fire, otherwise it will cause the battery to fire and burst. When installing the battery, do not apply pressure, otherwise it will cause the battery leakage, overheating, burst and fire.
  • Page 5 Do not touch the phone battery or charger with wet hands during the phone charging to avoid danger. When you charge your phone, try not to use your phone. When the battery is full, the battery icon stops scrolling, and the phone can be removed from the charger's adapter connector.
  • Page 6 measurement of the deviation, this limit already contains a certain margin of safety. The SAR value is tested according to the standard test procedure, with the maximum output power of the mobile phone to test the various frequencies. The test results are determined at the maximum power level, while the actual mobile phone is used in general Far below this test maximum.
  • Page 7 Getting started 3.1 Install the SIM card Tip 1, please place the SIM card where the child can not reach. 2, any scratches and bending may damage the SIM card. So be careful when inserting, removing and storing the SIM card. 3, before removing the SIM card, make sure the phone power is off.
  • Page 8 4.1 Browse contacts Select the record found, press the [Options] button to do the following: View: View this contact or send a short message. Send message: send a text message to the contact Call: Call or IP Call the current number. Edit: Edit contact current information.
  • Page 9 5.5 Emergency services Your network operator has at least one or more emergency service calls that can be made directly in any situation, even if the phone is locked or the SIM card is not inserted. Each country's emergency service telephone number is different. So you set the emergency service phone number is not global access, and sometimes because of the network, the environment and other issues can not call the emergency service phone number.
  • Page 10 call records The phone can keep calls and dial out the list of calls, but also record the call time, cost and so on. In the standby interface, press the dial key will be directly into the dialed telephone record interface.
  • Page 11 registration." Call forwarding: Transfer all voice calls: You can transfer incoming calls to pre-set voicemail or other phone numbers as needed to avoid loss of calls. contact not transfer: will be unable to contact the case of calls to the designated number;...
  • Page 12 7.2 Inbox The inbox keeps the received text messages (including unread and read messages). Select a message and [open] to read the message. Select [Options] to do the following: Reply: SMS reply to the current sender. Call Sender: You can choose to make calls and senders. Forward: Select to forward the contacts you need to forward.
  • Page 13 support software, so you need to register the business, and make manual settings, please contact the network operator for a more detailed description. Note: You can set the Call Forward feature to transfer voice calls to voicemail (the number that the caller uses for the message).
  • Page 14 Start recording: Select to enter the recording interface. Select [REC] to start recording. During recording, selecting [Stop] will end the recording. If you need to save the recording file, in the recording process or recording the end of the interface, select [Save] enter the file name to save the file.
  • Page 15 10 settings 10.1 Scenario Through this menu, you can set different profiles to suit different environments. The phone defaults to five profiles, each with a default value that you can set according to your needs. Standard mode Start: Select the mode you want to start. Personal settings Tips Setting: Select the mode you want ("Ring Only", "Shock Only", "Vibration and Bell", "After Vibration") Save the changes.
  • Page 16 Auto lock screen: Select the screen backlight time. There are "off", "15", "30", "1 minute", "5 minutes" five ways to choose to set. display date and time: select "off" "open" two ways to select the settings. Shortcut key settings Set the navigation key to quickly enter the menu in the standby interface. Flight mode Select Activate: Normal mode / flight mode other settings...
  • Page 17 applicable network in the list of available networks. GPRS forwarding priority mode Data Priority: Select the applicable network in the list of available networks. Phone priority: Select your network in the list of available networks. 10.5 mode settings Insert dual card, dual mode open, only SIM card 1 open, only SIM card 2 open, select the mode you need.
  • Page 18 [every day]. single: only once; every day: every week from Monday to Sunday will be busy; weekly: the same time every week alarm; Alarm ring: In this case you can set the ringing tone. Tip type: can choose vibration and ring, only ring, only vibration. Alarm 2 and alarm 3: Operation method with [Alarm 1].
  • Page 19 FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
  • Page 20 Body-worn Operation This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 5mm must be maintained between the user’s body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components.

Table of Contents