INVONS h-BT600 User Manual

Advertisement

User Manual of Bluetooth HEADSET
一、

Instructions

1、Insert the power adaptor into the 100-240V AC socket,Then put the
3.5mm plug on the adaptor into DC 5V socket on the transmitter,turn on the
power switch on the transmitter, at the same time the LED of Power will indicate
blue color and the transmitter is ready to work
charging function at this time, the power indicate LED on the transmitter will turn
off when the power switch is turned
Power Indicate LED
Transmitter
2、 Use the 3.5mm audio cable connect with such as TV,PC,DVD/CD, Mobile or
MP3/MP4/MP5 etc output socket of audio source,Connect the other end of audio
cable to the socket hole of audio in on the transmitter。Power switch turn on,at
the same time Led of audio indicate will glitter red and blue alternate,the
transmitter is searching other Bluetooth device to connecting。Press the power key
Model No.: h-BT600
Dongguan Haoyinliang Electronics Co.Ltd
Picture-1
INVONS
well, and the transmitter have
following Picture-1:
off。See
DC 5V Socket

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the h-BT600 and is the answer not in the manual?

Questions and answers

Summary of Contents for INVONS h-BT600

  • Page 1 User Manual of Bluetooth HEADSET Model No.: h-BT600 INVONS Dongguan Haoyinliang Electronics Co.Ltd 一、 Instructions 1、Insert the power adaptor into the 100-240V AC socket,Then put the 3.5mm plug on the adaptor into DC 5V socket on the transmitter,turn on the...
  • Page 2 of receiver around 5 seconds to turn on the Bluetooth function of headphone receiver, at this same time Led of audio indicate will glitter red and blue alternate on the headphone receiver,the audio LED light of transmitter will glitter one time around 10 seconds when the receiver and transmitter connect successful,and headphone receiver will glitter one time around on 5 seconds。See following Picture-2、3 :...
  • Page 3 power button to dial the last calling number。See following picture-5、6: Picture-5 Picture-6 Power button Volume control Balance left and right control Heavy bass switch Mono/Stereo switch Microphone 4、When the receiver’s built-in Li-ion battery is low and Below 3.2V the receiver begins alarm and blinking red lamp,...
  • Page 4 Picture-7 Picture-8 Power indicate Chargeable pin Diagram while charging 二、Matters need attention: 1.Audio indicate LED will turned off without 3.5mm audio cable input When the 5V power adaptor connect with the transmitter, Bluetooth function will turn on when insert the 3.5mm audio cable into the transmitter and at the same time the audio indicate LED will glitter blue and red alternate,Bluetooth function turned off when removed the 3.5mm audio cable from the transmitter。...
  • Page 5 level lest you damage your hearing。 6、Using the headphone may impair your ability to listen the Outside world, Please don’t use this product as much as possible without affecting your personal safety 。 Accessories: Power adaptor 5V 500mA 3.5mm audio cable 3.5 mm adaptor cable...
  • Page 6 FCC Warning Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

Table of Contents