Advertisement
EXERCISE MONITOR MODES
:-The exercise monitor features five different modes: _.::-_
SPEED--Displays
_ou?p_daling
speed, in miles per
"
hour..:
......
TIME--Displays
the elapsed time. Note: Time will be
counted only while you are pedaling, if you stop for ten
seconds or longer, the TIME mode will hold until you
resume pedaling.
DISTANCE--Displays
the total distance you have
pedaled, in miles.
EXERCISE MONITOR OPERATION
whenthe power is turned 0n, _he SCAN mode wi) be
"_:_"
belected automatically; One mode indicator will appear:
y t_e'word "SCAN." The SPEED, TIME, DISTANCE
and CALORIE modes Willbe displayed in a repeating
cycle. A second mode indicator will show which mode
is currently displayed.
If desired, the SPEED, TIME, DISTANCE or CALORIE •
mode can be selected for continuous display
by
repeatedly pressing the display mode button. The
modes will be selected in the following order:.SPEED,
TIME, DISTANCE, CALORIE, SCAN.
CALORIE--Displays
the total number of Calodes you
have burned. Note: If the pedaling resistance is near
the.lowest or highest setting, the actual number of
Calodes you have burned will be slightly lower or
.--
higher than the number displayed.
SCAN--Displays
the SPEED, TIME, DISTANCE and
CALORIE modes, for five seconds each, in a repeating
cycle.
To reset the LCD display, turn the.power off end then
on again by pressing the power button twice.
TURNING THE POWER OFF
When you am finished exercising, press the power
button to turn the power off. Note: li' the pedals are not
moved end the controls are not used for four minutes,
the power will turn off automat[celly.
10
Advertisement
