Sears 536.79751 Owner's Manual page 3

SAFETY RULES
SAFE STORAGE
• Always refer to the owner's manual storage
section for important details if the edger is to
be stored for an extended period.
• Never leave the edger with fuel in the fuel tank
inside a building where ignition sources are
present such as water and space heaters,
ctothes dryers, and the like. Allow the engine to
cool before placing in any enclosure°
• Keep the edger in safe working condition.
Check all fasteners at frequent intervals for
proper tightness.
REPAIR1ADJUSTMENTS SAFETY
• After striking a foreign object, stop the engine
(motor). Remove the wire from the spark plug,
and keep the wire away from the plug to
prevent accidental starting. Thoroughly inspect
the edger for any dam age, and repair the dam-
age before restarting and operating the edger.
• If the edger should start to vibrate abnormally,
stop the engine (motor) and check immedi-
ately for the cause, Vibration is generally a
warning of trouble
• Stop the btade whenever you leave the oper-
ating position° Also, stop the engine and dis-
connect the spark plug wire before unclogging
the blade and when making any repairs, ad-
justments, or inspections.
• When cleaning, repairing, or inspecting, shut-
off the engine and make certain all moving
parts have stopped.
• Never attempt to make any adjustments while
the engine is running (except when specifically
recommended by the manufacturer).
LOOK FOR THIS SYMBOL TO POINT OUT
IMPORTANT SAFETY PRECAUTIONS° IT
MEANS--ATTENTION!f! BECOME ALERT!!!
YOLIR SAFETY IS INVOLVED,
3