Summary of Contents for ADVANCED Network Devices Smart IP Strobe
- Page 1 Smart IP Strobe (IPSTROBE) Installation Version 2.2 8/24/2018 2018 ADVANCED NETWORK DEVICES 3820 NORTH VENTURA DR. ARLINGTON HEIGHTS, IL 60004 U.S.A ALL RIGHTS RESERVED...
-
Page 2: Proprietary Notice And Liability Disclaimer
The Advanced Network Devices product(s) discussed in this document are warranted in accordance with the terms of the Warranty Statement accompanying each product. However, actual performance of each product is dependent upon factors such as system configuration, customer data, and operator control. -
Page 3: Installation
8. Fold up the front of the chassis and fasten in place using the two previously removed screws that came with the strobe assembly. Advanced Network Devices • 3820 Ventura Dr. Arlington Hts. IL 60004 Support: tech@anetd.com •... - Page 4 When the contact opens, the strobe will turn off. If using a configuration file: <GPIO gpio0_when_input_gpio0="1" gpio0_when_input_gpio1="1" /> Advanced Network Devices • 3820 Ventura Dr. Arlington Hts. IL 60004 Support: tech@anetd.com • 847-463-2237 • www.anetdsupport.com v2.2...
- Page 5 “In L” and “GND” inputs on the board. If using a configuration file: <LineIn volume="8.000" gpio0_when_active="1" /> Advanced Network Devices • 3820 Ventura Dr. Arlington Hts. IL 60004 Support: tech@anetd.com • 847-463-2237 • www.anetdsupport.com v2.2...
-
Page 6: Wiring Reference
2, “+” to “N.O.” (normally open). We provide the connection details here for reference in the event of any wires becoming dislodged. Strobe Wiring Terminals Board Connections Advanced Network Devices • 3820 Ventura Dr. Arlington Hts. IL 60004 Support: tech@anetd.com • 847-463-2237 •...