Advertisement
Remote Control includes the battery (1 CR2025 Lithium battery); when battery is drained,
replace battery as below:
Pull the battery tray out of the battery compartment of Remote Control.
1.
Place new CR2025 button cell battery in the tray slot, as per the indicated polarity.
2.
Close the battery tray.
3.
Instructions for Use
Installation
Insert the pin from the supplied AC/DC adapter to DC Adapter Input Port on the rear of the unit.
Plug the AC/DC adapter to a wall power outlet (AC 100-240V 50/60Hz).
General Operation
1.
ress and hold the Power On/Off Button of the unit for 2-3 seconds to turn on the
unit with blue LED light on.
2.
ress the Source button repeatedly to select the playback source.
3.
ress the VOL +/- buttons to adjust volume level.
4.
ress the Mute button on the remote control to turn off the sound. Press it again to
turn it off.
5.
f the unit is not used for a long period of time, turn off the unit and pull out the
plug.
P
P
P
P
I
Advertisement
