Advertisement
Grilling
Installation
The grill accessory consists of two black grill grates, a grill element, and two grill-rocks.
To Install Grill
1. Before
installing
grill components,
be certain
controls are OFF.
2_
t
t
Place the two grill-rocks
into an empty basin pan
with their handles running parallel to the front of
the cooktop.
These grill-rocks must be used since
they support the grill element.
Position the grill element with the terminal plug
towards the terminal receptacle.
This receptacle is
located at the front of the left side and at the back
of the right side of the cooktop.
Slide the element
towards the receptacle
until the terminal
plug is
completely
engaged. The grill element should now
rest on the handles of the grill-rocks.
Place the black grill grates
on the top of the
cooktop.
To Remove
Grill
1. Be sure controls
are
OFF.
components
once they are cool.
Remove
grill
Q
To remove grill element, pull away from receptacle
until it is unplugged.
(Note:
Lifting the element
more than 2 inches above the cooktop
surface
while it is engaged in the receptacle could damage
the terminal plug.)
Installing
Griddle
1. Remove the two black grill grates from the grill.
2. Review the instructions for installing and using the
griddle that are packaged with the griddle.
Note: Accessory options are shown on page 3.
10
Advertisement
