Advertisement
How to dry a load of laundry
b_
Clean lint scre_
bef'rre each load.
_Put
laundry
into dryer and shut the door.
Set Cycle Selector Control II
) Set Hea! Temp Control lgl
Set End_of-Cycle Signal Control il.
Push the Start Control [] to start
your dryer.
(_
Remove load when dry.
I|
I
mouw
!
I
WUP
if.A1', lll_
IlUl
INi,
m
m imiim
I
m-li_
ImlI
lII)I
m
R
Iff_
Ill Cycle Selector Control
Use this control to select the proper drying method for the type of
items in the load. The control can be set for automatic or timed
drying, touch up or air. You can turn the control at any time to
make drying time longer or shorter or you can turn the control to
an OFF position to shut the dryer off.
OPERATING STATUS KEYS
Color coordinated keys indicate in which portion of the cycle the
dryer is operating.
Igl Heat Temp Control
Use this control to select drying temperature to match fabrics in
the load. The control can be adjusted from LOW for delicate fab-
rics to HIGH for sturdy work clothes.
It is important to choose the right temperaturefor the type of fab-
rics being dried. A wrong setting could damage some fabrics.
The Heat Temp Control will not work when the dryer is set in the
AIR cycle.
I1 End-of-Cycle Signal Control
Use this control to select the loudness of the signal that buzzes to
tell you the drying cycle is over. It can be adjusted to OFF or up
to LOUD. The dryer should be unloaded as soon as the cycle is
over to get the best wrinkle free results. Always use the signal
when drying noqron fabrics.
During Wrinkle Guard I the buzzer will sound every 5 minutes
unless the control is off.
Il! Start Control
Use this conl_folto start the dryer. Be sure the door is closed.
Openingthe door stopsthe dryer.Itwill notstartagainuntilyou
close the door and pushthe STARTcontrol. Be surethe Cycle
SelectorControlis ona drysetting.
Part No. 3392334
Advertisement
