Dell TrueMobile 1400 User Manual page 4

Completing the Setup: Dell TrueMobile 1400 WLAN Card User's Guide
Back to Contents
Completing the Setup: Dell™ TrueMobile™ 1400 WLAN Card User's
Guide
NOTE—Before you begin, be sure you have the required network information from your network administrator (see
in the Introduction section).
Configuring a network profile (Windows® 2000 environment)
Configuring a network profile (Windows® XP environment)
Configuring a network profile (Windows® 2000 environment)
Before you can connect to a wireless network, you must configure a network profile for that network on your computer using the
TrueMobile 1400 Client Utility. If you purchased your portable computer with the Dell TrueMobile 1400 Internal Dual-band WLAN
Card already installed and set up at the factory, follow the network profile configuration instructions provided below. If this is not the
case, first verify that the Dell TrueMobile 1400 Internal Dual-band WLAN Card has been properly installed in your computer
according to the installation instructions. Then proceed with the following instructions for configuring your network profiles. The
instructions explain how to open the TrueMobile 1400 Client Utility and how to use it to configure a network profile.
Opening the utility
1. From the desktop, click the Start button, point to Settings, and click Control Panel.
2. Double-click the TrueMobile Wireless Utility icon
3. If the Wireless Networks tab in the Dell TrueMobile 1400 Internal Dual-band WLAN Card Utility box is not on top, click
the Wireless Networks tab.
file:///D|/My%20Documents/1400/setup.htm (1 of 25) [11/15/2002 9:06:56 AM]
.
Before you begin