GULLCO 350 Parts List & Operating Instructions

FOR MORE INFORMATION
CONACT sales@gullco.com
KATBAK
Ceramic Weld Backing
-Impart X-ray
Quality Back
Beads On Root
Pass
-Weld One Side
Only
-Deposit More
Weld Metal
-Root Weld And Fill In One
Pass
-Eliminate Defects And Rework
-Eliminate Costly Unnecessary
Gouging And Grinding
...available in a wide range of sizes
and shapes for a variety of applications
GULLCO CERAMIC WELD BACKINGS.....A
COST EFFECTIVE
CANTILEVERED
welding
positioners
Gullco Cantilevered Welding
Positioners are widely applied to
reduce the cost of welding pipe
flanges and fittings. They are comp
-act, portable and provide fast
positioning and smooth rotation.
Standard or Purge-Equipped
units are available...and each can
be supplied in one of two "speed range" models to suit specific
application requirements
- rotation speeds are electronically -150 lb (68 kg) capacity in the
controlled and infinitely vertical position and 300 lb (136
variable in either direction kg) in horizontal (Model GP-150-6)
- stop/start foot switch on 8'
- table tilt manually set at any
angle through 180° (2438mm) cable
MODELS SPEED RANGE
Standard GP-200-M .025 to 6.5 RPM
GP200-H 0.50 to 15 RPM
Purge- GPP-200-M .025 to 6.5 RPM
Equipped GPP-200-H 0.50 to 15 RPM
KAMEL'' PIPE
"
TURNING ROLLS
Reduce pipe preparation
costs with this rugged,
portable equipment which
rotates pipe from 2" to 16" (51
- 406mm) diameter. Gullco
Kamel Rolls come complete
with a protected on/off foot
switch on a 10' (3m) cable.
Electronic controls are
immune to damage from high frequency electromagnetic
interference.
Two models of Power Rolls are available;
Model KR-200-M...has a turning capacity of 1500 lbs
(680 kg), and an infinitely variable forward/reverse
speed
range of 1-40 ipm (2.5-102 cm/min).
Model KR-200-H...has a turning capacity of 1000 lbs
(454
kg) and an infinitely variable forward/reverse speed
range of
2-80 ipm (5-203 cm/min).
Idler Rolls:
Model KR-750...load capacity is 750 lbs. (340 kg) with a
pipe
diameter range of 2" - 6" (51 - 406 mm).
Self Propelled Portable Plate Edge Bevellers
Gullco has two new Portable Plate Edge Bevelling
Machines with
adjustable angle bevelling heads enabling bevel angles
of 22-1/2°
to 55°. They provide clean machined bevels with no
thermal
distortion. The KBM-18 and KBM-28 are both capable of
beveling any length of mild steel, stainless steel or
aluminum plate. The KBM -18 has a maximum bevel
width capacity of 0.70" (18mm) and can handle plate
thickness 1/4" to 1-1/2" (6.3 mm to 38.1 mm).The KBM-
28 has a maximum bevel width capacity of 1.10" (28mm)
and can handle plate thicknesses from 5/16" to 2" (7.93
mm to 50.8 mm).
*Both of the above machines have an adjustable angle
bevelling head 22-1/2° through 55°
ALL GULLCO PORTABLE
PLATE EDGE BEVELLERS...
- are designed for one man
operation
- are self-propelled
- are mounted on exclusive under
carriages
- have a spring loaded self-aligning
mechanism that automatically
compensates for uneven work
surfaces
- produce clean machined bevels
with no thermal distortion
- bevel any length of mild steel,
stainless steel or aluminum plate
MODEL 350
MODEL 350A
350 LB (159 kg) CAPACITY
ELECTRODE STABILIZING OVEN

PARTS LIST

OPERATING INSTRUCTIONS

GULLCO INTERNATIONAL LIMITED CANADA
Tel: 905-953-4140 Fax: 905-953-4138
GULLCO INTERNATIONAL INC U.S.A
Tel: 440-439-8333 Fax: 905-953-4138 Email: ussales@gullco.com
GULLCO INTERNATIONAL (U.K.) LIMITED EUROPE
Tel: +44 1257 253 579 Fax: +44 1257 254 629 Email: sales@gullco.co.uk
GULLCO INTERNATIONAL PTY LIMITED AUSTRALIA
Tel: 61 (07) 5496 9555 Fax: 61 (07) 5496 9522 Email: ausales@gullco.com
GULLCO INTERNATIONAL LIMITED INDIA
Tel: 91 (20) 4272212 Fax: 91 (20) 4272212 Email: india.lo@gullco.com
April, 2009
&
E-mail: sales@gullco.com
GD-019