Matrix PowerWatch X Manual page 2

RUNNING MODE SYNC DATA TO YOUR SMARTPHONE
1 2 1 2
The PowerWatch X can track each run you take. 1. While under the Watch Settings menu,
1. Press MODE until Running Mode screen appears. the Mobile screen appears.
2. Press SET to sync.
2. Press SET to cycle through Start, Stop and Reset.
See https://store.powerwatch.com/pages/f-a-q for more details. See https://store.powerwatch.com/pages/f-a-q for more details.
STOP WATCH AUTO SLEEP TRACKING
1 2 1
SCROLL until 1. Press MODE until Stop Watch screen appears. The PowerWatch X automatically senses when you sleep
and wake.
2. Press SET to cycle through Start, Stop and Reset
1. Press
2. Turn SCROLL
Display may update slowly, but Stop Watch result is accurate.
NOTIFICATIONS
Incoming call Message received
2
MODE until Daily Activity screen appears.
Activity goal met Alarm ringing
to read Today's Sleep data.
SUPPORT REGULATORY STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
Our Frequently Asked Questions (FAQ) page is filled
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
with detailed instructions, tips and warranty information:
any interference received, including interference that may cause undesired operation.
https://store.powerwatch.com/pages/f-a-q
WARNING: Changes or modifications not expressly approved by the manufacturer responsible
The Matrix PowerWatch X does not need charging under for compliance could void the user's authority to operate the equipment.
normal use, which includes: adjusting the watch so it
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
stays in direct contact with the user's wrist; limiting device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
Bluetooth and backlight activity while the watch is worn
uses and can radiate radio frequency energy and, if not installed and used in accordance with
on the user's wrist; and not activating the watch
the instructions, may cause harmful interference to radio communications.
unnecessarily or repeatedly when it is not worn on the
However, there is no guarantee that interference will not occur in a particular installation.
user's wrist. PowerWatch X firmware can be updated
If this equipment does cause harmful interference to radio or television reception, which can
through the app.
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
One Year Satisfaction Guarantee
• Reorient or relocate the receiving antenna.
See the FAQ and guarantee at
• Increase the separation between the equipment and receiver.
https://store.powerwatch.com/pages/f-a-q. • Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
For questions or problems, contact us at • Consult the dealer or an experienced radio/TV technician for help.
support@matrixindustries.com. Thank you!
Manufacturer's name: Matrix Industries Inc.
FCC ID: 2ANY2MPW05
EUROPE (EU)
1.Safety:
2. RF & EMC
a) Rated Voltage: 3.8V DC, 105mA • Frequency band(s) = 2402-2480MHz
Battery Type: Lithium-ion Polymer (3.8V, 210mAh) • Maximum radio frequency power transmitted in
b) Model Name: PowerWatch X
the frequency band(s) = -5.58dBm
Operation Temperature: 45C max • Declaration of Conformity Inserts
c)
• Hereby, Matrix Industries Inc, declares that the
radio equipment type is in compliance with Directive
2014/53/EU. The declaration of conformity may be
d) Manufacturer's name: Matrix Industries Inc
consulted at www.powerwatch.com/declaration.pdf
e) Manufacturer name & address: Matrix Industries
• This equipment may be operated in:
Inc. 1455 Adams Drive, Suite 1190 Menlo Park,
CA 94025 USA
f)
JAPAN
CANADA
This device complies with Industry Canada's licence-exempt
RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference, and (2) This device
CHINA
must accept any interference, including interference that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada
applicables aux appareils radio exempts de licence. L'exploitation
est autorisée aux deux conditions suivantes : (1) l'appareil ne doit
pas produire de brouillage, et (2) l'utilisateur de l'appareil doit
accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.