Summary of Contents for Landi AECR C10
- Page 1 This document is the property of LANDI.
-
Page 2: Table Of Contents
6.8 Fingerprint Identification ................ 19 6.9 Camera ...................... 2 0 6.10 Usage of Printer .................... 2 1 7. Standard ....................... 23 This document is the property of LANDI. Its content cannot be reproduced or divulged without the company’s written approval. 2 / 29... - Page 3 11. Others ......................29 11.1 Product accessories can be sold separately .......... 2 9 11.2 Customer Service .................... 2 9 11.3 Customer Service Address ................ 2 9 This document is the property of LANDI. Its content cannot be reproduced or divulged without the company’s written approval. 3 / 29...
-
Page 4: Disclaimer
Care has been taken to ensure that the content of this document is as accurate as possible. Fujian LANDI however declines any responsibility for inaccurate, incomplete or outdated information. This document is copyrighted. All rights are reserved. Fujian LANDI reserves the right to modify the software, hardware or manual of this product at any time without notice. ... -
Page 5: Introduction
When the terminal is attacked illegally (e.g. opening the casing), the sensitive information stored in the terminal will be immediately erased. Please do not open the casing so as to avoid unnecessary trouble. When the terminal is attacked illegally, there will be obvious alarm information on the screen and alarm sound. Please contact the customer service. This document is the property of LANDI. Its content cannot be reproduced or divulged without the company’s written approval. 5 / 29... -
Page 6: Product Configuration
Introduction AECR C10 is a new generation of smart cash register terminal designed by Fujian LANDI, configured with touch screen and high‐speed communications, mainly used in indoor environment. As a smart cash register terminal, AECR C10 integrates the function of cash register and financial payment, which has passed various industrial security ... -
Page 7: Operating Environment
LED Digital Tube 403×225×380 3. Unpacking Please check carefully whether the terminal and fittings are disassembled or damaged. AECR C10 is a secure payment product, any disassembling behavior may lead to its failure to use. 1. The following items are included in AECR C10 box. AECR C10 terminal Power Adapter User guide 2. Disassemble all the packaging of the terminal and accessories. 3. You are recommended to keep all the packaging of AECR C10 for further packing or shipment if needed in the future. This document is the property of LANDI. Its content cannot be reproduced or divulged without the company’s written approval. 7 / 29... -
Page 8: Components
21. Cash drawer port 22. DC power supply 23. Speaker LED Digital Tube: This document is the property of LANDI. Its content cannot be reproduced or divulged without the company’s written approval. 8 / 29... - Page 9 14. SAM card slot 15. Micro USB port 16. Micro SD slot 17. LAN (Ethernet) port 18. USB port 19. Headphone jack 20. RS232 port 21. Cash drawer port 22. DC power supply 23. Speaker This document is the property of LANDI. Its content cannot be reproduced or divulged without the company’s written approval. 9 / 29...
-
Page 10: Installation
************************************************************************* Notice: Do not arrange power cables along the pedestrian walkway or across the channel on the floor for the sake of safety. ************************************************************************* 5.2 Ports Description Figure 5‐1 When the rear trapdoor is removed, the slots from top to bottom are as follows: SAM card reader, Micro USB port, TF card reader. ************************************************************************* Caution: The ports of terminal must not be connected wrongly. The terminal cannot be used properly because of any error connections. ************************************************************************* This document is the property of LANDI. Its content cannot be reproduced or divulged without the company’s written approval. 10 / 29... -
Page 11: Micro Usb
NC Ground ********************************************************************** Notice: When the AECR C10 is connected to the computer, the Ethernet and the USB Type‐A connections are temporarily disabled. The connection will be resumed automatically when the AECR C10 is disconnected to the computer. ********************************************************************** This document is the property of LANDI. Its content cannot be reproduced or divulged without the company’s written approval. 11 / 29... -
Page 12: Microsd Memory Card
Take the installed preciously SAM card out of the slot (If the SAM card was not installed before, please skip the step). When introducing a SAM in its slot, be sure to put the cut corner as indicated on the picture. Close the trapdoor. This document is the property of LANDI. Its content cannot be reproduced or divulged without the company’s written approval. 12 / 29... -
Page 13: Peripheral Cable Connections
*********************************************************************** Notice: Please put the power cable, USB cable and Ethernet cable in the slot of the back cover to prevent the cables from being scattered. *********************************************************************** This document is the property of LANDI. Its content cannot be reproduced or divulged without the company’s written approval. 13 / 29... -
Page 14: Debugging And Trial Operation
5.7 Debugging and Trial Operation Debugging and Trial Operation Check if the power cable is properly connected. When the power supply is functional, the red light will be on. Check if the communication cable, SAM card (if necessary) and SIM card (if necessary) are properly installed. Press the power button and observe the system led is from red to blue. If the button has been pressed but the terminal has no any response, please refer to the "Trouble shooting". After the installation of the equipment, please have a trial operation. This document is the property of LANDI. Its content cannot be reproduced or divulged without the company’s written approval. 14 / 29... -
Page 15: Usage Instruction
Main Screen. The function of the buttons is displayed on the screen, which is convenient to use. Figure 6‐2 This document is the property of LANDI. Its content cannot be reproduced or divulged without the company’s written approval. 15 / 29... -
Page 16: Reading Cards
controlled by software. 6.3 Reading Cards Magnetic stripe card The card can be read bi‐directionally, with the stripe facing down. Use a regular movement in order to ensure a reliable card reading. Figure 6‐3 Unacceptable magnetic card: 1. Being curved. 2. Deformation and edge defection. 3. The magnetic stripe is obviously damaged, scratched or out of magnetic. 6.4 Smart Card Insert the smart card vertically with the metal chip facing the operator and keep it in position throughout the transaction. This document is the property of LANDI. Its content cannot be reproduced or divulged without the company’s written approval. 16 / 29... -
Page 17: Contactless Card
*********************************************************************** 6.5 Contactless Card Place the card right against the sensing area. Keep the card close to the reader during the transaction. You can remove the card when the transaction is completed. Figure 6‐5 This document is the property of LANDI. Its content cannot be reproduced or divulged without the company’s written approval. 17 / 29... -
Page 18: Pin Pad
Notice: Different version product has different contactless card configuration. Please consult local department as per your needs. *********************************************************************** 6.6 PIN Pad AECR C10 is a countertop device with large screens. In order to ensure payment security, password input is completed through a dedicated PIN Pad. Figure 6‐6 This document is the property of LANDI. Its content cannot be reproduced or divulged without the company’s written approval. 18 / 29... -
Page 19: Usb Port
Fingerprint identification module located behind the Main Screen can be used for login, authorization and so on. Figure 6‐8 *********************************************************************** Notice: Please keep the fingerprint module surface clean. *********************************************************************** This document is the property of LANDI. Its content cannot be reproduced or divulged without the company’s written approval. 19 / 29... -
Page 20: Camera
15.6’’ Dual Monitor 10cm<L<30cm 10cm<L<30cm Figure 6‐9 LED Digital Tube 10cm<L<30cm Figure 6‐10 Photographing The LCD screen will preview the current status when the camera is started. Press the button on the screen to complete the process of photographing. 1. Scan 1D Code: Code 128, Code 93, UPC/EAN/JAN, CODABAR 2D Code: QR CODE, PDF417 This document is the property of LANDI. Its content cannot be reproduced or divulged without the company’s written approval. 20 / 29... -
Page 21: Usage Of Printer
The carbonized layer of the paper roll should follow the way as Figure 6‐11. Figure 6‐11 *********************************************************************** Notice: The quality of the paper roll will affect the printing display. Please do not use inferior paper roll to avoid inconvenience. *********************************************************************** This document is the property of LANDI. Its content cannot be reproduced or divulged without the company’s written approval. 21 / 29... - Page 22 *********************************************************************** Notice: Please make sure that paper roll cover is buttoned with the entire panel, otherwise it may lead to poor printing or failing to recognize the paper roll. *********************************************************************** This document is the property of LANDI. Its content cannot be reproduced or divulged without the company’s written approval. 22 / 29...
-
Page 23: Standard
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable This document is the property of LANDI. Its content cannot be reproduced or divulged without the company’s written approval. 23 / 29... - Page 24 Please contact your retailers for more detailed information about the compliance solution in place for disposing of your old product and used batteries. This document is the property of LANDI. Its content cannot be reproduced or divulged without the company’s written approval. 24 / 29...
-
Page 25: Maintenance
If the distance of printing paper from the printer should be adjusted, please shut down the terminal and place the printing paper in the right way. Dust or wastepaper remnant in the printer will reduce the efficiency. Please use soft brush to clean it (Be careful not to scratch the printer head). This document is the property of LANDI. Its content cannot be reproduced or divulged without the company’s written approval. 25 / 29... -
Page 26: Troubleshooting
MSR card card reader. If manually operated transaction works, reader. the failure may be caused by magnetic card reader. 4. Damaged 4. If the manual transaction fails, please check the smart card communication status or check the smart card reader. 5. Damaged 5. Use more than one smart card to test the SAM card or transaction, to confirm the failure is not caused by the unconnected. smart card. 6. 6. Make sure the SAM card is correctly inserted into This document is the property of LANDI. Its content cannot be reproduced or divulged without the company’s written approval. 26 / 29... -
Page 27: Notices
Do not plug out smart card during transaction process. Please shut down the terminal to save energy at the end of the daily operation. The terminal should be managed by specific person who is familiar with the terminal. Stop operation when there is abnormal phenomenon, shut down the power supply and inform the service provider: 1. Harsh sound in operation. 2. Pouring water or impurities into device accidentally. 3. Bad smell in operation. ********************************************************************* WARNING: The terminal is limited to indoor use. Any exposure to rain or dust for the terminal causing its malfunction is not within the scope of warranty. ********************************************************************* This document is the property of LANDI. Its content cannot be reproduced or divulged without the company’s written approval. 27 / 29... -
Page 28: Transport And Storage
Packing box should be at least 15cm above the ground, and be away from heat, cold, window or air inlet source at least 50cm. This document is the property of LANDI. Its content cannot be reproduced or divulged without the company’s written approval. -
Page 29: Others
Please provide valid proof such as purchase invoice in case of maintenance. 11.3 Customer Service Address Fujian LANDI Commercial Equipment Co., Ltd Add: Building 17, Block A, Fuzhou Software Park, No. 89 Software Road, Fuzhou, Fujian, China Tel: +86‐591‐88077077 Fax: +86‐591‐88077085 ZIP: 350003 http://www.landicorp.com This document is the property of LANDI. Its content cannot be reproduced or divulged without the company’s written approval. 29 / 29...