Advertisement
Setup
Any item not listed in
1. After unpacking the box, unscrew and remove the cap at the top of the tank.
2. Fill the tank with a water-based fog fluid (described above).
3. Screw the cap back onto the top of the tank so it is secure. Make sure the tube (that
passes through the cap) is inserted as far into the tank as possible.
4. Connect Party Ball Fogger to a power outlet.
5. On the rear panel, set the Power Switch to the On position. Party Ball Fogger will begin
warming up.
Important: If the environment is significantly colder than the temperature of Party Ball
Fogger, you may need to wait for it to adjust to the ambient temperature.
Additional Safety Notes:
•
Do not spray the fog directly toward people or into an open flame.
•
Keep Party Ball Fogger at least 3 feet (1 meter) away from other objects, and keep it at
least 10 feet (3 meters) away from flammable materials. The nozzle becomes very hot
during operation, and the machinery requires good ventilation.
•
Never touch the nozzle during operation. It becomes very hot; touching it during operation
could result in burns or other injuries.
•
Use in well ventilated environment to prevent excessive concentration of vapor.
•
Do not use this product as a space heater or humidifier.
Introduction
Box Contents
is sold separately.
5
Advertisement
