Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Behringer PMH660M/PMH880S
Summary of Contents for Behringer PMH660M/PMH880S
- Page 1 User’s Manual Version 1.3 November 2004...
-
Page 2: Important Safety Instructions
EUROPOWER PMH660M/PMH880S IMPORTANT SAFETY INSTRUCTIONS CAUTION: To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside; refer servicing to qualified personnel. WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture. -
Page 3: Table Of Contents
It is our philosophy to share our joy with you, because you are the most important member of the BEHRINGER team. With your highly competent suggestions for new products you’ve greatly contributed to shaping our company and making it successful. In... -
Page 4: Introduction
BEHRINGER is a company with its roots in professional recording studio technology. For many years we have been successful in developing products for studio and live use. These include microphones and 19"... -
Page 5: Input Section
EUROPOWER PMH660M/PMH880S The LEVEL control adjusts the channel signal level in the main mix. 2.1.1 Input section The CLIP LED is very useful to control the input gain. It should never be constantly illuminated (only with signal peaks). The PAD switch reduces the input sensitivity of the channel by approx. -
Page 6: Connectors
EUROPOWER PMH660M/PMH880S If STANDBY is pressed, all input channels are muted. During breaks you can thus prevent the microphones from picking up noise or interference, which would then be reproduced by the P.A. system. The advantage is that all faders can be left untouched while you play a CD via the CD/TAPE inputs (see ). -
Page 7: Digital Effects Processor
EUROPOWER PMH660M/PMH880S 3. DIGITAL EFFECTS PROCESSOR A special feature of your PMH880S and PMH660M is the built- in multi-effects processor that features the same audio quality as our renowned studio-grade VIRTUALIZER PRO DSP2024P. The PMH880S even has two effects processors, each of them with 99 different standard effects such as reverb, chorus, flanger, delay, vocal distortion as well as various effects combinations. -
Page 8: Installation
AC power cord. 4.2 Audio connections The inputs and outputs of the BEHRINGER EUROPOWER are unbalanced 1/4" TS connectors—except for the balanced mono line inputs. Of course, all inputs and outputs work with both balanced and unbalanced connectors. - Page 9 EUROPOWER PMH660M/PMH880S Fig. 4.6: Loudspeaker connector Please be sure to only use commercial SPEAKON NL4FC) for connecting your loudspeakers to the mixer. Please check the pin connections of your loudspeakers and cables depending on the EUROPOWER speaker output you choose.
-
Page 10: Wiring Examples
EUROPOWER PMH660M/PMH880S 5. WIRING EXAMPLES For stereo operation the POWER AMP switch PMH880S must be set to its upper position (MAIN L/MAIN R). Outputs A and B deliver the stereo main signal to the P.A. speakers. Two active speakers, wired in parallel, are connected to the PREAMP MONITOR output. - Page 11 PMH880S with a subwoofer connected to OUTPUT B that will receive the full (bridged) output power. A separate stereo power amp (BEHRINGER EUROPOWER EP1500) for the stereo main P.A. signal is connected to the PRE AMP MAIN outputs. The PRE AMP MONITOR output is wired to active speakers on the stage.
-
Page 12: Specifications
Weight BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or illustrated. -
Page 13: Warranty
BEHRINGER Spezielle Studiotechnik GmbH. BEHRINGER ALL RIGHTS RESERVED. © 2004 BEHRINGER Spezielle Studiotechnik GmbH, Hanns-Martin-Schleyer-Str.