Table of Contents
Advertisement
4) After entering the main menu, press "Start recording" to enter the
pairing screen; press "Historical record lookup" to enter the historical
record list.
5) After entering the pairing screen, please refer to the last two digits of the
serial number on the back of the Host Module or on its package, and
select the corresponding name of Host Module (e.g. If the last two digits
is "00", please select "Einthoven CR1K-00" from the list); a monitoring
screen will shown up if the connection is successfully set up.
6) First after entering the monitoring screen, a message suggesting
attaching the Product will be shown on the screen. Please be prepared to
attach the Product onto the user's left chest. The App will make a beep
sound every 10 seconds until the Product has been attached to a human
body.
- 15 -
Advertisement
Table of Contents
