SBJ BM-257 User Manual page 9

B3. Out of Range Alert.
Under below conditions, out of range alert can be heard from parent unit.
a> Baby unit is turned off.
b> The units are detected out of communication range.
c> Baby unit is in low power.
B4. Lens & Camera Adjustment
1> If the video of parent unit is blurred, adjust the lens switch of the baby unit until the video reaches the
best image quality. (See picture below)
2> Adjust the Camera Rotation Handle to the desired viewing angle.
You can position and adjust the Baby Unit in a variety of ways to provide the best view of your baby. To
optimize the performance, position the monitor unit 3 ft (1m) away from the baby.
B5. Set up removable Mounting Clip
The Baby Unit can be clip on the table edge by setting up the removable mounting clip. After inserting the
mounting clip at the base bottom, user can easily fix the Baby Unit into different location. Setting and
disassembly method are shown in the figure below.
B6. Wall Mount
Setting
9
Disassembly