Table of Contents
Advertisement
Functions Operation and Connection Instructions
1. Bluetooth pairing
a. Turn on the unit, press Bluetooth button on remote control, "BT" will be flashing on LED.
Turn on Bluetooth in your digital device, and searching for a new device. when detected Pi
KX100 select it. connection complete when "BT" display still.
b. If you would like to connect to a new device while the Pi Wave Soundbar is connected to
another device, please follow either one of below two steps.
1/ Turnoff Bluetooth from a connected smartphone or MP3 player in settings and follow
instruction "a." above to pair the new device to Pi Wave Soundbar.
2/Press and hold PLAY/PAUSE button on remote control for two seconds until BT flashes
on the screen. Repeat instruction "a." above to pair the new device to Pi Wave
Soundbar.
When connected to soundbar via Bluetooth, you can press remote button Pause/Play,
Previous and next button to control music playback.
Note:
If Pi Wave karaoke Soundbar is not connected to any Bluetooth device, "BT" will slowly flash.
The Bluetooth wireless operational range is 10 meters.
Some Bluetooth device may request PIN code ("Passkey", "PIN Number" or "Password"). Please
enter "0000"
When turning on Pi Wave karaoke Soundbar, it will automatically connect to last connected
Bluetooth device (Make sure Bluetooth is on in device settings)
2. Auto shutdown function for energy saving
a. Pi Wave Soundbar will automatically shut down into sleep mode after 40 minutes of
inactivity, such as no music input or no connection to any digital device. This is normal.
FAQ and Troubleshooting
1. Soundbase does not turn on.
Solutions:
1) Please confirmed you are using Pi Electronics' +20V 4A output AC adaptor.
2) Check if AC adaptor LED is on and confirm AC adaptor is connected to a power outlet which
has AC 110/220 V output.
2. Remote control doesn't work
Solutions: Replace with brand new battery. Check if there is any object between the speaker
and remote control. Please remove it if there is an object block IR censor.
3. Cannot connect Bluetooth
Solutions:
1) Confirm the Pi Wave karaoke Soundbar is in Bluetooth mode. If not, please press
Bluetooth button on your remote control and try connect again.
Page | 12
Advertisement
Table of Contents
