Advertisement
Styles. Tap to turn Stack on and tap to turn it off is called latching behavior.
NOTE - How you select between latching or momentary behavior is discussed in Section 5 below.
Play-Stop All: This one behaves exactly like a Bonus button on the III set so that Play-Stop All is activated
with a tap. Holding this button does nothing.
Erase / Erase All: This button behaves similarly to a Bonus button on the III set so that Erase is activated
with a tap, but adds a bit more power. Let's say loops 1 and 3 are playing and loops 2 and 4 are stopped. Tap
this button and loops 2 and 4 blink; then tap either Loop 2 or Loop 4 to erase that loop. This is nothing new. But
if you want to erase both loops, simply hold down the Erase / Erase-All button and both loops disappear. This is
much easier than tap Erase, tap Loop 2, tap Erase, tap Loop 4.
4. NEW FUNCTIONS
In addition to the looping functions like Octave and Reverse, the SC provides foot control of functions that were
previously only controlled with finger buttons. Thru Mute can be turned on and off. Play Style can be changed
when no loops are playing. And now there really is a Panic button if you like. It stops all loops and turns off all
active functions.
5. ASSIGNING FUNCTIONS TO THE BONUS BUTTONS
1) Press and hold the Bonus Assign button until the round display's center light blinks. The pedal is now is
Bonus Assign mode.
2) Select a Bonus button & action: yellow or green, tap or hold. Tap the yellow Bonus button and the bright
yellow light blinks. Hold the yellow Bonus button and the dim yellow light blinks. Tap the green Bonus button and
the bright green light blinks. Hold the green Bonus button and the dim green light blinks.
3) Tap the Select finger button and the blinking light moves around the display. Stop on the function you want
controlled by that action. For example, if the bright green blinking light is on Fade, a fade will be initiated by
tapping the green Bonus button.
4) Tap the Bonus Assign button to complete programming; the display's center light stops blinking. Momentary
Or Latched Stack Button Behavior Here's how to change the behavior of the Stack button. While in the Bonus
Assign mode, tap the Stack button and the Momentary light turns on, meaning momentary behavior will be used.
Tap it again and the light turns off, meaning latching behavior will be used. Leave the light in which ever state
you prefer then exit Bonus Assign mode by tapping the Bonus Assign button.
6. SPECIFICATIONS
Power 9V, AC or DC, positive or negative tip, 300mA or greater Power connector OD = 5.5mm, ID = 2.5mm,
length = 9.0mm
7. Warranty
Boomerang Musical Products, Ltd. warrants your Boomerang
materials and workmanship for one (1) year from the date of purchase. This warranty is void if the unit has been
abused in any way.
If you encounter a problem, contact us 1-800-530-4699 or sales@boomeranglooper.com.
Boomerang Looper LLC reserves the right to make changes in product design without any obligation to
•
include those changes in any products previously manufactured.
There is no express warranty on goods covered by this agreement.
•
TM
Side Car
controller to be free from defects in
®
Advertisement
