1. Manuals
  2. Brands
  3. JMTek Manuals
  4. Accessories
  5. PBW200
  6. Instruction manual

JMTek PBW200 Instruction Manual

With wireless charging
Hide thumbs
1
2
3
4
Table of Contents

Advertisement

Quick Links

Download this manual
PBW200 Power Bank with Wireless Charging Instruction Manual
Congratulations on your purchase of the PBW200 Power Bank with wireless charging.
To ensure a long service life and optimum functionality of the product we recommend that you
read this manual carefully.

Package Content:

1 Power bank
1 Micro USB Cable
1 User Manual

Specifications:

Capacity: 4000mAh/3.7V
Input: 5.0V/2A
Output: 5.0V (USB Port)
Wireless Output: 5.0V

Product description:

First Use:

First make sure that the product is intact and that the delivery is complete. Before using the
appliance for the first time, charge the unit completely! We recommend devices with "2A output",
then the charging time is about 2-3 hours.

Wireless charging at home/in office

Connect the device to the power outlet using the micro USB cable attached to the PC, laptop, or
USB adapter. The LEDs will light up during the charging process. As long as one or more LEDs are
flashing, the charging process has not yet been completed. If all LEDs are lit continuously, the
charger is fully charged.
Make sure the device is secure and cannot wobble or fall down.
Place your mobile phone (or other device) on the transfer surface. Please, see the sketch:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PBW200 and is the answer not in the manual?

Questions and answers

Summary of Contents for JMTek PBW200

  • Page 1: Package Content

    PBW200 Power Bank with Wireless Charging Instruction Manual Congratulations on your purchase of the PBW200 Power Bank with wireless charging. To ensure a long service life and optimum functionality of the product we recommend that you read this manual carefully.
  • Page 2 Battery indication: The LED indication shows the current battery status. Please press the button to see the result: 1 LED < 2 LEDs < 3 LEDs < 4 LEDs < 100% In case only 0-1 LEDs are flashing, the battery status is less than 10 %. Please recharge the charger.
  • Page 3 Note: In case your mobile phone does not support wireless charging, please connect it to the USB Output of the charger by using the original cable. Recharging: Connect the charger to the USB port of computer, laptop or USB adaptor by using the enclosed cable.
  • Page 4 To maintain 100% battery capacity and to prevent damage by depth discharge the item should be recharged every 6 months. Battery will loose capacity when stored without charging. If the product gets very hot, please disconnect the item and do not use it. Use this product with original accessories only.

Table of Contents