Table of Contents
Advertisement
Quick Links
SEARS
OWNERS
MANUAL
MODEL
NO.
919.184160
IMPORTANT:
Read
the Safety
Guidelines
and
All Instructions
Carefully
Before
Operating.
CRAFTSMAN.
SINGLE STAGE
AIR COMPRESSOR
ASSEMBLY
OPERATION
MAINTENANCE
REPAIR PARTS
Record in the spaces provided.
(1)
The model number which can be found
on the label on the front of the air tank
saddle.
(2) The code number which can be found
on the foil label on the side of the air
tank.
(3) The Manufacturer's
Number (ASME
Code Compressors only) is located on
the metal data plate which is welded
onto the side of the air tank. (This data
plate is painted the same color as the
tank.)
(4)
The Motor Manufacturer's name which
is located on the motor label.
(5) The Motor Mfg. number - also located
on the motor label.
Retain these numbers for future refer-
ence.
Model No.
Code No.
Sears,
Roebuck
and
Co.,
Hoffman
Estates,
IL 60179
U.S.A.
MGP-184160
3/18/99
Advertisement
Table of Contents
Related Manuals for Sears 919.18416
Summary of Contents for Sears 919.18416
- Page 1 SEARS OWNERS MANUAL MODEL 919.184160 IMPORTANT: Read the Safety Guidelines All Instructions Carefully Before Operating. Sears, Roebuck MGP-184160 3/18/99 CRAFTSMAN. SINGLE STAGE AIR COMPRESSOR ASSEMBLY OPERATION MAINTENANCE REPAIR PARTS Co., Hoffman Estates, Record in the spaces provided. The model number which can be found on the label on the front of the air tank saddle.
-
Page 2: Table Of Contents
GLOSSARY ... ACCESSORIES FOR USEWlTH SEARSAIR COMPRESSORS ... GENERALINFORMATION DESCRIPTION OF OPERATION ... _ ..INSTALLATION AND BREAK-IN PROCEDoURES... Location of Air Compressor Piping ... Lubrication and Oil ... Wiring Instructions ... Wiring Diagram ... Break-In Procedures ... OPERATING PROCEDURES ... -
Page 3: Warning Chart
OF AIR TOOLS. spray guns, air operated accessories, tires other INFLATABLES CAN CAUSE THEM TO EXPL__Xp__= or fly apart, and could result in serious injury. Your AIR COMPRESSOR is powered by electrieity. Like any other electrically powered device, IF it is NOT PROPERLY... -
Page 4: Safety Instructions
IMPORTANT HAZARD RISK TO BREATHING RISK FROM FLYING OBJECTS RISK FROM MOVING PART: RISK OF BURN SC0M1098 SAFETY INSTRUCTIONS WHAT HAPPEN SED A from your compressor The air stream may contain carbon monoxide or other toxic vapors, or particles from the tank or other components. -
Page 5: Specification Chart
ACCESSORIES FOR USE WITH SEARS AIR COMPRESSORS The following accessories are available through the current Power and Hand Tool Catalog or full-line Sears stores. • SPRAY GUNS • BLOW GUNS • AIR CAULKING GUNS •... -
Page 6: Generalinformation
(slightlyhigher than the pressure switch cut-out setting). AND BREAK-IN designed with fins to provide humidity is high, a Sears air filter can be installed to remove excessive moisture. that The air compressor should be as near to air outlets as possible in order to avoid long pipe lines. -
Page 7: Piping
Place unit on a level surface. Remove oil fill plug and slowly add a special compressor oil such as Sears 9- 16426 or SAE-20-20W SF motor oil until it is even with the top of the oil fill... -
Page 8: Break-In Procedures
A clean air compressor runs cooler and provides longer service. Clean or blow off fins and any other parts of the air compressor that collect dust or dirt. Do not place rags, containers or other material on or against the ventilation openings in the belt guard. -
Page 9: Oil - Checking And Changing
100hours of operation.Todrainthe oil, removethe oildrain plug and collecttheoilin a suitable container. Besureto replacethe plug securelybeforeadding newoil. Useaspecialcompressor oil such as Sears 9-16426 or SAE-20-20W SFmotor oil. (Crankcaseoil capacityis 16fluidounces.) Underextreme winterconditionsuse 10weightoil. Air Tank - Draining Water WATER WILL CONDENSE IN THE AIR TANK. -
Page 10: Pulley'and Flywheel - Alignment
NOTE The belt should be centered over the grooves on the flywheel and motor pulley. Push the motor back into regular position and tighten bolts securely. Proper tension is approxi- mately 1/4" belt deflection measured midway be- tween the pulley and flywheel when a 3 pound weight or equivalent finger pressure is applied at this point. - Page 11 "cut-in" pressure of pressure switch. Remove and clean or replace. (Do not overtighten.) Check wiring connection inside pressure switch and terminal box area. Return to Sears Service Center for inspection or replacement ifnecessary. Have checked at a local Sears Service Center. switch Bleed the line by pushing the lever on the pressure switch to the "OFF"...
-
Page 12: Air Compressor Diagram
AIR COMPRESSOR DIAGRAM 12 -- Eng... -
Page 13: Parts List
DESCRIPTION PART NUMBER SSF-953-ZN Self Tapping Screw 10 x 5/8 (6 used) Belt Guard CAC-22-2 Lock Nut SSF-8113-ZN Bracket CAC-2-1 Belt Guard Closure CAC-362-1 SSP-9401 Connector Body SSP-7812 Nut-Sleeve Assembly 1/2" (2 used) SSP-7811 Nut Sleeve Assembly 1/4" SS-8553 Connector Body C-BT-224 Poly-V Belt Set Screw... -
Page 14: Compressor Pump Diagram
COMPRESSOR PUMP DIAGRAM i,,,/44 45 O_,.-.- q_'_ ..--- =,..I. 66 (oil fill plug) 66 (oil drain plug) 14 --Eng... -
Page 15: Parts List
PART NUMBER SSF-6627 SSF-935 AC-0322 AC-0333 SSF-955 CAC-4213 CAC-291-1 • 265-25 • SSF-9821 CAC-294 • 265-196-1 CAC-4212-1 CAC-54-2 ÷ CAC-56-1 CAC-58 ÷ ÷ CAC-57 CAC-55-1 265-19 CAC-207 265-410 SSF-927 AC-0205 SST-104 SSP-486 SSP-505 DAC-276 265.-16-1 AC-0203 SSF-925 SSN-1018 265-2 SSN-1014-ZN SSF-3039-ZN AC-0169 265-6... -
Page 16: Howto Order Repair Par'rs
RETURN IT TO THE NEAREST SEARS REPAIR CENTER THROUGHOUT THE UNITED STATES AND SEARS WILL REPAIR IT, FREE OF CHARGE. IF PURCHASED FROM OR- CHARD SUPPLY HARDWARE, RETURN TO THE NEAREST ORCHARD...
Need help?
Do you have a question about the 919.18416 and is the answer not in the manual?
Questions and answers