Advertisement
Quick Links
INSTALLATION
INSTRUCTIONS
PARTS LIST
Spare tire rim
Valve stem
Spare tire caution label
Hold down bolt
Tool case
Jack
Wheel nut wrench/Jack handle
Extension bar
Tire and load information label
Spare tire (T165/80D17)
(sold separately)
© 2018 American Honda Motor Co., Inc. – All Rights Reserved.
Accessory
SPARE TIRE KIT
P/N: 06421-TY2-A14ZA (19
BII09104-18 (1805)
Application
2019 RLX
"
)
Carpet
2 Clips
TOOLS AND SUPPLIES REQUIRED
Isopropyl alcohol
Shop towel
Trim clip remover
INSTALLATION
Client Information: The information in this
installation instruction is intended for use only by skilled
technicians who have the proper tools, equipment, and
training to correctly and safely add equipment to your
vehicle. These procedures should not be attempted by
"do-it-yourselfers."
NOTE:
• Be careful not to scratch the interior trim when installing
the spare tire kit.
• Install the correct size tire.
• Use a tire changer, and the Operation Manual
furnished with the tire changer to install the spare tire to
the spare tire rim.
• Give all the removed parts to your client.
Publications No.
VERSION 1
Issue Date
MAY 2018
1 of 4
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for Acura 06421-TY2-A14ZA
- Page 1 Accessory Application Publications No. INSTALLATION VERSION 1 SPARE TIRE KIT 2019 RLX " P/N: 06421-TY2-A14ZA (19 Issue Date INSTRUCTIONS MAY 2018 PARTS LIST Carpet Spare tire rim Valve stem 2 Clips Spare tire caution label TOOLS AND SUPPLIES REQUIRED Hold down bolt...
- Page 2 Using isopropyl alcohol on a shop towel, clean the Remove the tool box. spare tire rim in the area shown. CAUTION LABEL TOOL BOX Set aside. VALVE STEM HOLE SPARE TIRE RIM (Clean this area with isopropyl alcohol.) Remove the adhesive backing from the caution label, and attach the caution label to the spare tire rim in the area shown.
- Page 3 Install the jack, the wheel nut wrench/jack handle, Using a marker, mark the carpet through the clip and the extension bar into the new tool case. hole. EXTENSION WHEEL NUT WRENCH/JACK JACK HANDLE NEW TOOL CASE 10. Remove the carpet, and make a 7 mm hole in the marked position.
- Page 4 12. Install the spare tire assembly into the spare tire area 14. Open the driver’s door and locate the “TIRE AND (label side down), and secure it to the vehicle using LOADING INFORMATION” label on the doorjamb. the spare tire bolt provided. Tighten the bolt Using isopropyl alcohol on a shop towel, clean the securely.
Need help?
Do you have a question about the 06421-TY2-A14ZA and is the answer not in the manual?
Questions and answers