Page 1
TO SWITCH COMMODE SEAT DIRECTION: INSTALLATION a. Remove commode bucket holder frame. c. Remove 4 screws. b. Remove seat back (L-Bars). B152-11 d. Rotate seat. e. Re-Attach 4 screws. B156-11 NOTE: BEFORE ASSEMBLY, SEE BACK PAGE TO SWITCH FOR RIGHT OR LEFT HAND USE.
Page 2
Clips must be secured on all 4 legs. Assemble legs without armrest on side away from commode cut-out section. Slide leg attachments with tips onto bottom of all Assemble legs with armrest four legs. on side nearest commode Make sure pin has clicked into holes and that all cut-out section.
Need help?
Do you have a question about the B152-11 and is the answer not in the manual?
Questions and answers