Advertisement
CAUTIONS:
Landing gears are designed to meet T.T.M.A. recommended practice RP-4 and A.A.R.-931 requirements.
When operating the landing gears, it is necessary to observe some cautions. By doing so you will ensure long
trouble free service.
1. Do not over extend or over retract landing gears.
2. Never drop trailer on landing gears. Always extend landing gears until sand shoes
CAUTION
3. Always ensure that landing gear shoes or foot pads will rest on a hard ground
4. Always retract landing gears fully before moving the trailer.
5. Always store the crank on the crank holder after extending or retracting the
6. Replace all damaged or missing parts.
7. Failure to replace worn or damaged riser nut and retracting screw assembly could
1950 Industrial Blvd. • P.O. Box 425 • Muskegon, MI 49443-0425 • Phone 888-396-6501 • Fax 800-356-3929
Holland USA, Inc. Facilities:
Dumas, AR
Muskegon, MI
Holland, MI
Warrenton, MO
Monroe, NC
Wylie, TX
Ph: 888-396-6501 Fax: 800-356-3929
4
contact ground, then lift trailer approximately 1 inch before removing tractor
from trailer.
surface or concrete pad. If necessary, place shoes on a support plank to prevent
the landing gears from sinking into the ground surface. (This is especially
important with liquid cargo where a shift in the contents could overturn the
trailer!).
landing gear.
cause a failure.
HOLLAND USA, INC.
www.thehollandgroupinc.com
Copyright © March 2005 • The Holland Group, Inc.
Holland International, Inc.
Holland Hitch of Canada, Ltd.
Holland, MI
Woodstock, Ontario • Canada
Phone:
616-396-6501
Phone:
Fax:
616-396-1511
Fax:
Holland Equipment, Ltd.
Norwich, Ontario • Canada
519-537-3494
Phone:
519-863-3414
800-565-7753
Fax:
519-863-2398
Holland Hitch Western, Ltd.
Surrey, British Columbia • Canada
Phone:
604-574-7491
Fax:
604-574-0244
XL-LG330-01 Rev. B
Advertisement
