RRS MTX Manual

Stow in Versa TVC 3/2 Quick-Column
1 3
Remove hook from Replace hook;
bottom of Quick-Column. stow & go!
2
Screw MTX shaft
into hook.

GUARANTEE

ALL REALLY RIGHT STUFF BRAND PRODUCTS ARE
GUARANTEED TO THE ORIGINAL PURCHASER TO BE FREE
OF DEFECTS IN MATERIALS OR WORKMANSHIP FOR FIVE
(5) YEARS FROM THE DATE OF PURCHASE. PRODUCTS
WILL BE REPAIRED OR REPLACED AT OUR OPTION.

Snap Out, Snap In

Tilt bit at an angle to
remove from
holder.

Hex Key Removal

Rotate hex key out then
tilt to remove.

Hex Key Storage

Tuck stubby end in place then
push down.

MTX MULTI-TOOL

Driver Handle

SPECIFICATIONS:

Weight of Driver Handle with primary Bit Holder & Bits installed ...................................... 3.4oz / 95g
Weight of secondary Bit Holders & Bits ............................................................................ 1.3oz / 38g
Length of Driver Handle ................................................................................................4.9" / 124mm
Total number of Bits included ....................................................................................................... 22
Number of Hex Keys included ................................................................................ one stubby 3/16"
Replacement Bits / Hex Key ..................................................................................................... $1 / $8
Bits are sourced from Taiwan. All other components are sourced from the US. Bits and hex key
made from steel with corrosion resistant coating. Hex socket driver accepts standard 3/16" bits.
® , ™, © 1990-2017 Really Right Stuff, Inc. All rights reserved.
1146 Farmhouse Lane, San Luis Obispo, CA 93401 USA
1-805-528-6321 | 1-888-777-5557
www.ReallyRightStuff.com
Bits
(22 included)

Hex Key

Bit Holders

(1 included)