Swann SW231-FLO Quick Start Manual

9. Miscellaneous Features
The BabyCam Monitor includes two colored rings to
chage the appearance of the Flower Camera. Use a
pin or flat sharp edge to remove the current ring if
necessary.
10. Technical Specifications
Monitor
Frequency: 2.4GHz
Transmission Range: 150' (50m)
Channel: 3 Selectable channels
Antenna: Built-in omni-directional
Display: LTPS-TFT 1.5" LCD Full colour
Dimensions: 3.1 (L) x 1.9 (W) x 4.7 (H)
79.9 x 49 x 119.9 mm
Weight: 5.29 oz (150 grams)
Power: DC 6V or 4 x AAA
Operating temperature: 32°F~104°F (O°C~40°C)
Camera
Frequency: 2.4GHz
Antenna: Built-in omni-directional
Image sensor: 1/3" CMOS image sensor
Effective pixels: NTSC: 510(H) x 492 (V)
CCIR: 628(H) x 582(V)
Lens: f6.0mm, F 1.8
Dimensions: 3.1 (L) x 2 (W) x 4.4 (H) inches
79.5 x 50 x 111 mm
Weight: 3.88 oz (110 grams)
Power: DC 6V
Operating temperature: 32°F~104°F (O°C~40°C)
WARNING: Keep camera & monitor out of children's
reach. Do not place camera in or on any part of the cot.
STOP
has the answers
If this product does not work when you first plug
it in or you have any concerns, don't take it back
to the store!
Use the Installation Guide / Manual in the pack, or
Visit www.swannsecurity.com/help
for FAQs, troubleshooting hints & more, or
Contact our expert Tech Support Team...
Email - tech@swannsecurity.com
United States 1-800-627-2799
1-877-274-3695
Sun 4pm-12am, Mon-Fri 8am-12am (PDT)*
Australia 1300 138 324
Mon 9am-5pm, Tues-Sat 1am-9am (AET)
New Zealand 0800 479 266
Mon 11am-7pm, Tues-Sat 3am-11am (NZDT)
International +61 3 8412 4610
Mon 9am-5pm, Tues-Sat 1am-9am (AET)
*Hours vary during daylight savings times
FCC WARNING STATEMENT:
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation
BabyCam Monitor
Quick Start Guide
SW231-FLO
www.swannsecurity.com