ATD Tools TURBO 350 Forward Manual

Advertisement

ATD TURBO 350 FORWARD MANUAL (P/N: 32248)
Please read all of these instructions before proceeding with installation.
This or any valvebody should only be installed by a qualified race transmission technician. If you are unfamiliar
with any of the operations or terms, take your transmission to a qualified race transmission shop.
Your 32248 Turbo 350 Forward Manual Valvebody kit includes the following parts:
• (1) ATD Turbo 350 Forward Manual Valvebody,
• (1 ea.) Valvebody Gaskets,
• (1) Separator Plate,
• (2) Stiffener Plate,
• (1) Modulator Plug,
• (2) 3/8" Set Screw,
• Instructions & Decals.
SHIFT PATTERN
This valvebody employs a forward shift pattern: Park - Reverse - Neutral - 3- 2 - 1.
Do not neutral this or any three speed transmission at speed or the transmission may explode!
WARRANTY
This product is warranted for 12 months from date of purchase against defects in material and workmanship.
During this period such defects will be repaired or replaced at manufacturer's option. Return any defective
products to your supplier. This warranty does not cover damage caused by misuse, alteration, or negligence. All
implied warranties, including but not limited to implied warranties of fitness and merchantability are limited
in duration. Under no circumstances will manufacturer be responsible for special, incidental, or consequential
damages or costs arising from or in conjunction with the installation or use of any product of the manufacturer.
Improper installation may cause property damage and/or death.
CAUTION
W140N10145 Fond Du Lac Ave.
Germantown, WI 53022
Phone: (262) 251-7777
Email: info@autotransdesign.com
www.AutoTransDesign.com
ATD 32248 / Page 1 of 2

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TURBO 350 and is the answer not in the manual?

Questions and answers

Summary of Contents for ATD Tools TURBO 350

  • Page 1 Improper installation may cause property damage and/or death. Your 32248 Turbo 350 Forward Manual Valvebody kit includes the following parts: • (1) ATD Turbo 350 Forward Manual Valvebody, • (1 ea.) Valvebody Gaskets,...
  • Page 2 INSTALLATION INSTRUCTIONS FOR ATD TURBO 350 FORWARD MANUAL VALVEBODY 1. Disassemble transmission. This valve body should be installed on a freshly rebuilt trans. 2. Assemble direct drum with two new lip seals on piston. Discard inner drum seal. Set clutch clearance at .045- .065”.

Table of Contents