Advertisement
NOTES
• The ambient temperature for Sprayer 100 with attached liquid
container should not exceed 50°C.
• Despite its robust construction, avoid throwing the device or
otherwise handling it inappropriately.
• To avoid pump damage, never operate Sprayer 100 without liquid.
• The batteries shipped with Sprayer 100 and the charger are mutually
compatible. Never use the charger to charge other electrical devices.
• Battery overcharging is impossible. We therefore recommend keeping
the charger connected to the mains and returning Sprayer 100 to the
charger after use. This consumes extremely low levels of power.
• The rechargeable battery will have a service life of several years
if used as indicated.
WARRANTY
Sprayer 100 is guaranteed for the duration of two years from the date of
purchase and subject to the following conditions:
• If a defect occurs in either materials or workmanship within the warranty
period, we will rectify it, at our option and expense, by repair or replacement
of either parts or the entire device.
• The warranty does not cover damage caused by failure to comply with the
Operating Instructions, use of unsuitable liquids, unauthorized modifications
to the device as well as adjustments to the device, cables or charger connectors.
• European and US patents.
CE Declaration of Conformity
We, Steripower GmbH & Co. KG, Enzianstrasse 2, 82319 Starnberg,
Germany declare under our sole responsibility that the product
SP Sprayer 100 – a battery-operated spray bottle, to which this
declaration relates – is in conformity with the relevant provisions of
the EMC Directive 2004/108/EC and the Low Voltage Directive 2006/95/EC.
Starnberg, 01/06/2007
Steripower GmbH & Co. KG
EN
INSTRUCTIONS FOR USE
Sprayer100
Advertisement
Table of Contents
Summary of Contents for Steripower Sprayer 100
- Page 1 • The ambient temperature for Sprayer 100 with attached liquid container should not exceed 50°C. • Despite its robust construction, avoid throwing the device or otherwise handling it inappropriately. INSTRUCTIONS FOR USE • To avoid pump damage, never operate Sprayer 100 without liquid. • The batteries shipped with Sprayer 100 and the charger are mutually Sprayer100 compatible. Never use the charger to charge other electrical devices. • Battery overcharging is impossible. We therefore recommend keeping the charger connected to the mains and returning Sprayer 100 to the charger after use. This consumes extremely low levels of power. • The rechargeable battery will have a service life of several years if used as indicated. WARRANTY Sprayer 100 is guaranteed for the duration of two years from the date of purchase and subject to the following conditions: • If a defect occurs in either materials or workmanship within the warranty period, we will rectify it, at our option and expense, by repair or replacement of either parts or the entire device. • The warranty does not cover damage caused by failure to comply with the Operating Instructions, use of unsuitable liquids, unauthorized modifications to the device as well as adjustments to the device, cables or charger connectors. • European and US patents. CE Declaration of Conformity We, Steripower GmbH & Co. KG, Enzianstrasse 2, 82319 Starnberg, Germany declare under our sole responsibility that the product SP Sprayer 100 – a battery-operated spray bottle, to which this declaration relates – is in conformity with the relevant provisions of the EMC Directive 2004/108/EC and the Low Voltage Directive 2006/95/EC. Starnberg, 01/06/2007 Steripower GmbH & Co. KG...
- Page 2 SPRAYER 100 PUTTING SPRAYER 100 INTO SERVICE • Fill the liquid container with fluid. Do not fill past the bottom of the threaded container neck. • Screw the liquid container on to Sprayer 100 with the red winding and tighten until you feel a noticeable resistance (do not force). • Adjust the spray nozzle by rotating to the required spray pattern Spray nozzle (single jet to fine mist). Socket for the charger‘s barrel REFILLING THE LIQUID CONTAINER connector • Unscrew the empty container . Screw-on container • Fill the liquid container with fluid and screw back on. Make sure that the liquid container is screwed on straight to prevent thread damage. Weighted suction line NOT WORKING – WHAT TO DO? Sieve If Sprayer 100 stops spraying, check: Push button • if there is still fluid in the liquid container • if the battery is charged Red winding for attaching the container to Sprayer 100 • if dirt got into the liquid container and clogged the sieve...
Need help?
Do you have a question about the Sprayer 100 and is the answer not in the manual?
Questions and answers