During the use of this machine the operator is permanently exposed to a noise level of 106db. Dear Customer, thank you for choosing a quality product from Eder Maschinenbau GmbH. For the correct use of the device and to avoid accidents, please read the instructions carefully. Ignoring the safety instructions can result in serious injuries! This document provides the various inspection and maintenance procedures which enables the smooth operation of this device.
Symbols The transport of persons is prohibited. Notes , danger and warning The use in closed rooms is Read the instructions carefully prohibited. before using the device During operation, wearing of Refuelling the hot personal protective equipment Motor is prohibited is required.
Some of the applications of EDER Powerwinch 500 9. Do not use the EDER Powerwinch 500 if include: damage on the device or the equipment is Forest: detected.
Fig. 2: Danger zone in case of pulley failure (if used) Slings and rope guide Fuel and filling the tank The EDER Powerwinch 500 should be anchored to The EDER Powerwinch 500 is powered by a a firm standing object (such as a tree) strong 4-stroke engine:...
Careful control on the throttle allows loads to be positioned exactly as required. Once tension is off Fig. 4: EDER Powerwinch 500 in working position the winch rope, the operator’s end of the rope can be carefully removed from the cable clamp.
Powerwinch 500 To stop the motor keep the rope slack and the Before starting the EDER Powerwinch 500 fix it in throttle sets immediately to idle. Allow the motor to the working position and push the primer (Fig. 8b) 3 cool by running on idle for a few seconds.
Guidelines for the use of pulleys Storage when not in use When a pulley is used the traction power of the Before storing the EDER Powerwinch 500 for a long EDER Powerwinch 500 is doubled. period it should be cleaned and the metal parts Max traction power of EDER Powerwinch 500: 5kN should be greased.
EDER Powerwinch 500. cover (Fig. 8d). Check the spark plug (Fig. 14) from It is possible that the EDER Powerwinch 500 loose time to time (approx. every 50h) and ensure that the lubrication during the first few working hours. The electrode gap is between 0.5mm and 0.6mm...
Spare part list motor Part number name 203707 Cover 203713 Screw Cover 203710 Fuel tank 203704 Fuel tank cap 203701 Air filter housing 203709 Air filter 203708 Air filter cover 203712 Carburetor 203706 Motor starter 203701 Ignition coil 203702 Spark plug 203711 Oil tank cap All other engine spare parts can be found at http://www.honda-engines-eu.com/en/web/eec-public-site/spare-...