Table of Contents
Advertisement
b. Non-operating
–40° to 158°F (–40° to 70°C) package ambient with a maximum gradient of 68°F (20°C) per hour. This
specification assumes that the drive is packaged in the shipping container designed by Seagate for use with
drive.
Figure 22.
Location of the HDA temperature check point
6.5.2
Relative humidity
The values below assume that no condensation on the drive occurs.
a. Operating
5% to 95% non-condensing relative humidity with a maximum gradient of 20% per hour.
b. Non-operating
5% to 95% non-condensing relative humidity.
6.5.3
Effective altitude (sea level)
a. Operating
–1,000 to +10,000 feet (–304.8 to +3,048 meters)
b. Non-operating
–1,000 to +40,000 feet (–304.8 to +12,210 meters)
6.5.4
Shock and vibration
Shock and vibration limits specified in this document are measured directly on the drive chassis. If the drive is
installed in an enclosure to which the stated shock and/or vibration criteria is applied, resonances may occur
internally to the enclosure resulting in drive movement in excess of the stated limits. If this situation is apparent,
it may be necessary to modify the enclosure to minimize drive movement.
The limits of shock and vibration defined within this document are specified with the drive mounted by any of
the four methods shown in Figure 23, and in accordance with the restrictions of Section 9.3.
32
Savvio 10K.4 SAS Product Manual, Rev. C
Advertisement
Table of Contents
