Summary of Contents for Hioki CC 14SF
- Page 1 Cut-Off Machine CC 14SF CC 14SF Handling instructions Read through carefully and understand these instructions before use.
- Page 2 45 mm 120 mm 60 mm 28 mm 27 mm 90° 45° 60° 2 - 6.5 mm 16 mm 6 mm...
- Page 3 Wheelcover Motor Cut-off wheel Handle Spark chute Sub cover (A) Stopper Hex. bar wrench When setting at an angle of 0° When setting at an angle of 30° When setting at an angle of 45° Vise (B) 10 mm bolts Steel board (More than thickness 6 mm) ×...
-
Page 4: General Operational Precautions
wrenches are removed from the tool before turning GENERAL OPERATIONAL PRECAUTIONS it on. 17. Avoid unintentional starting. Do not carry a WARNING! When using electric tools, basic safety plugged-in tool with a finger on the switch. Ensure precautions should always be followed to reduce the switch is off when plugging in. -
Page 5: Specifications
SPECIFICATIONS Voltage (by areas)* (110V, 115V, 120V) (230V, 240V) Input 1640W* 2000W* 115 mm × 130 mm 70 mm × 235 mm 90° Max. cutting dimensions Height × width 106 mm × 106 mm 45° No-Load Speed 3800 /min Max. working peripheral speed 4800 m/min Weight 16.5 kg... -
Page 6: How To Operate
Too much force on the handle will put excessive 4. How to use metallic block (Fig. 7) pressure on the motor and reduce its capacity. When the cut-off wheel has a reduced outer Do not fail to switch OFF the switch after operation diameter, insert between the vise (A) and (B) a is completed and pull the plug out. - Page 8 ° × × × ° ×...
- Page 12 ITEM ITEM PART NAME PART NAME SUB COVER (A) VISE ASS'Y NUT M5 SCREW MACHINE SCREW (W/WASHERS) M5 × 16 SCREW HOLDER HEX. SOCKET HD. BOLT (W/WASHERS) M8 × 25 FLANGE BOLT (A) COVER SPACER CHAIN HEX. SOCKET HD.BOLT M10 × 20 BOLT WASHER M8 WASHER (A) BOLT...
- Page 13 Code No. C99142231 F Printed in China...
Need help?
Do you have a question about the CC 14SF and is the answer not in the manual?
Questions and answers