Summary of Contents for brilong CA20
- Page 1 Wire-free Camera CA20 User Manual September 2018 www.brilong.com Based on app version: 3.1.10 (9.1) DOC. version 0.11...
- Page 2 Brilong CO. Though Brilong CO. has made every effort to ensure the accuracy of this document at the time of publication, Brilong CO. does not assume any liability or obligation for the use of the information provided in this...
-
Page 3: Table Of Contents
NSTALL THE CAMERA TO THE PLACE YOU WANT TO MONITOR If you want to use the wall mount ..........................12 If you want to use the garden stake .......................... 13 USING THE BRILONG HOME APP ..........................14 ..................................15 IVE VIEW .................................. -
Page 4: Operating Environment
Operating Environment Operating temperature range: -20 to 60 °C (-4 to 140 °F) iOS: 8.0 or above Android: 4.4 or above Camera overview See the following images for the locations of main controls and components on the camera. Accessories The following two accessories are available for installing with the camera. -
Page 5: Installing The Camera
Installing the camera Follow the steps below to install the camera before use. Step 1/6: Connect the camera to the accompanying USB charger. Connect the camera to the accompanying USB charger via the accompanying Micro-USB cable to make sure the camera has enough power during installation and setup. Micro-USB port Step 2/6: Turn on the camera. -
Page 6: Step 3/6: Install, Log In The Brilong Home App & Create A Room
3. Tap “SIGN IN” to log in the Brilong Home app with your Brilong account. Note: If you do not have a Brilong account, follow the steps (1 and 2) below to register a new account before login. - Page 7 Enter the room name (and The room you added displays on descriptions; you can also take a the home page. If you want to add more custom room thumbnail) and then tap “Done”. rooms, tap > Add/Edit Room. To add a device, tap >...
-
Page 8: Step 4/6: Connect Your Mobile Device To The Camera
> “Add Device” > connected to a 2.4 GHz Wi-Fi Wi-Fi network (you selected on Step network. (This Wi-Fi network is also “Brilong CA20”. 1) to which your mobile device is to be used for connecting to the connected. Then tap... - Page 9 Enter the device name. > “Add Device” > “Brilong CA20”.
- Page 10 Tap “Settings”. Tap the Brilong device (e.g., Wait for the connection to complete. “BRILONG_ap_80038”) on the Settings page of your mobile device. Then, return to the Brilong Home app.
-
Page 11: Step 5/6: Fully Charge The Camera
Once the connection is complete, you can see the Brilong Home app homepage. Step 5/6: Fully charge the camera. For wireless use of the camera, use a USB charger via a micro-USB cable to fully charge the camera. (You can always check the battery level later anytime on the app.) Note: If you need a continuous and uninterrupted power supply, keep connecting the camera to a USB charger. -
Page 12: Step 6/6: Install The Camera To The Place You Want To Monitor
Step 6/6: Install the camera to the place you want to monitor. Place the camera directly on an ordinary horizontal surface and point the camera to the place you want to monitor. You can also place the camera on a metal surface at any angle by using the camera's magnetic ... -
Page 13: If You Want To Use The Garden Stake
If you want to use the garden stake Center the extruding screw side of the garden stake to the bottom of the camera. Extruding screw side Fasten the garden stake to the camera. Insert the garden stake into the ground (e.g. in your backyard) until it can firmly stand up by ... -
Page 14: Using The Brilong Home App
Using the Brilong Home app Once you have completed installing the camera, open the Brilong Home app. Next, select the room where the camera is installed, and then tap the camera icon to watch the live view and use other functions as needed. -
Page 15: Live View
Live view The live view supports both horizontal and vertical views. Available controls are shown below: Return to the app home page Settings Live view Mute on/off Maximize screen on/off Take a snapshot Record video start/stop Microphone on/off Green: on Black: off Note: In the horizontal view, tap anywhere on the screen to view the above controls. -
Page 16: Menu Page
Add/Edit Room: Create a room or edit room information. Add Device (set up a new device): Add a device to the current room you have selected. Help: Connect to the Brilong website for more information and assistance. -
Page 17: Settings Page
View or edit device name and password. You can also check and upgrade firmware version. Notifications Turn on/off the notifications sent by the Brilong Home app. Wi-Fi Reset Reset the Wi-Fi connection. You will need to re-establish the Wi-Fi connection with the camera. -
Page 18: Time Zone
Time Zone Set up the time zone where the camera is located. Power Line Frequency Set the correct power line frequency based on the camera's geographic region to avoid possible image flickering. -
Page 19: Important Safety Notices And Warnings
Important Safety Notices and Warnings To use this camera safely, please carefully read and follow the guidelines as shown below: 1. Keep the camera and all its components out of the reach of children and pets. 2. Comply with the building and installation codes to install and use the camera. 3. -
Page 20: Fcc Statement
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. -
Page 21: Caution
Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.