Download Print this page

HBE SOFTEX Operating And Mounting Instructions Manual

Advertisement

Quick Links

Solutions for Fluid Technology
OPERATING AND MOUNTING
INSTRUCTION SOFTEX
1. FUNCTIONAL DESCRIPTION
The Softex
coupling is a torsionally flexible, puncture-
®
proof three part claw coupling.
Due to the elastic gear ring, it enables to dampen im-
pacts, torsional vibrations, as well as noises.
Furthermore, the gear ring has a high resistance, elastici-
ty as well as good resistance to oils, greases, a variety of
solvents, ozone and influences of the weather.
2. TECHNICAL DATA
Hub
Gear Ring
Zahnkranz
Nabe
A
G
B
A
d 1
Ø
Ø
Ø
s
L 1
MATERIALS
Cast Iron (GG)
Spheroidal Cast Iron (GGG)
Steel (St)
Stainless Steel (VA)
Sinter Steel (S)
HBE GmbH
Hönnestraße 47 | 58809 Neuenrade | Germany
®
L
Hub
Nabe
G
B
h
d
Ø
B1
d 2
Ø
Ø
b
s
E
L 2
Due to the construction of the coupling (hub / elastic
gear ring / hub), an angular resp. a radial misalignment
of the shafts to be connected as well as expansions will
be compensated.
The operating temperatures are between -50°C and
+120°C, depending on the type of gear ring. Short term
temperature peaks up to +150°C are admissible.
Type:
Clamping Hub (for splines)
f 1
Phone +49 (0) 23 94 / 616-0
Fax
+49 (0) 23 94 / 616-25
M
info@hbe-hydraulics.com
www.hbe-hydraulics.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the SOFTEX and is the answer not in the manual?

Questions and answers

Summary of Contents for HBE SOFTEX

  • Page 1 Solutions for Fluid Technology OPERATING AND MOUNTING INSTRUCTION SOFTEX ® 1. FUNCTIONAL DESCRIPTION The Softex coupling is a torsionally flexible, puncture- Due to the construction of the coupling (hub / elastic ® proof three part claw coupling. gear ring / hub), an angular resp. a radial misalignment...
  • Page 2 ØD 2 ØA Z=Anzahl ØG Types 75/90 – 90/100 FA Types 28/ 38 – 65/75 FA HBE GmbH Phone +49 (0) 23 94 / 616-0 info@hbe-hydraulics.com Hönnestraße 47 | 58809 Neuenrade | Germany +49 (0) 23 94 / 616-25 www.hbe-hydraulics.com...
  • Page 3 Please pay special attention to the indications and be read carefully. Please pay attention to the security prescriptions concerning security (Item 6). This operating and warning indications. The Softex coupling is appro- and mounting instruction is part of the delivery extent and ®...
  • Page 4 Cheese head screw in case of Clamping Hub bei Klemmnabe Zylinderschraube 92 Sh A white 95/98 Sh A 64 Sh D green HBE GmbH Phone +49 (0) 23 94 / 616-0 info@hbe-hydraulics.com Hönnestraße 47 | 58809 Neuenrade | Germany +49 (0) 23 94 / 616-25 www.hbe-hydraulics.com...
  • Page 5 Please pay attention to the danger of ignition in locking screw with corresponding starting torque hazardous areas. (Table 5.3). HBE GmbH Phone +49 (0) 23 94 / 616-0 info@hbe-hydraulics.com Hönnestraße 47 | 58809 Neuenrade | Germany +49 (0) 23 94 / 616-25...
  • Page 6 0.50 0.34 100/110 0.71 0.64 0.52 0.36 110/125 0.75 0.67 0.55 0.38 125/145 0.80 0.70 0.60 HBE GmbH Phone +49 (0) 23 94 / 616-0 info@hbe-hydraulics.com Hönnestraße 47 | 58809 Neuenrade | Germany +49 (0) 23 94 / 616-25 www.hbe-hydraulics.com...
  • Page 7 6. USE IN HAZARDOUS LOCATIONS 6.1 INDICATIONS CAUTION! Concerning the explosion groups IIB and IIC, follow- HBE does not use aluminium as material for the ing materials are used by HBE: couplings applied in hazardous areas. Cast Iron (GG25, GG20)
  • Page 8 Check of the tightness of the set screws in the hubs • Check of the tightness of the fixing screws when using flange hubs HBE GmbH Phone +49 (0) 23 94 / 616-0 info@hbe-hydraulics.com Hönnestraße 47 | 58809 Neuenrade | Germany +49 (0) 23 94 / 616-25 www.hbe-hydraulics.com...
  • Page 9 • Retighten the fixing screws by the starting torque and protect it from self-loosening with Loctite HBE GmbH Phone +49 (0) 23 94 / 616-0 info@hbe-hydraulics.com Hönnestraße 47 | 58809 Neuenrade | Germany +49 (0) 23 94 / 616-25...
  • Page 10 • Check and correct, if necessary, alignment and dimension E of the coupling • Tighten the fixing screws with tightening torque and protect it from self-loosening with Loctite HBE GmbH Phone +49 (0) 23 94 / 616-0 info@hbe-hydraulics.com Hönnestraße 47 | 58809 Neuenrade | Germany +49 (0) 23 94 / 616-25 www.hbe-hydraulics.com...
  • Page 11 • Check and correct, if necessary, alignment and dimension E of the coupling • Tighten the fixing screws with tightening torque and protect it from self-loosening with Loctite HBE GmbH Phone +49 (0) 23 94 / 616-0 info@hbe-hydraulics.com Hönnestraße 47 | 58809 Neuenrade | Germany +49 (0) 23 94 / 616-25 www.hbe-hydraulics.com...
  • Page 12: Declaration Of Conformity

    II of the guide. A conformity to the norms EN 1127-1: 2011; EN 1127-2: 2002; EN 12463-1: 2009 and EN 13463-5: 2011 is given. Following test certifi cate of type is existing for the Softex – Elastic Couplings: ®...