Summary of Contents for LIT E Series
- Page 2 1 - LED Light 2 - Mount Hardware 3 - Toggle Switch (if not using Power Switch) 4 - Main Cable 5 - Display Adapter Cable 6 - Switch Adapter Cable 7 - Terminating Cap 8 - Power Switch 9 - Zipties STEP 1 Install mount hardware to both sides of LED light as shown.
- Page 3 STEP 2 Connect Main Cable STEP 3 Connect the 3 color connector to the LED connector. wires on the Main Cable to the 3 wires on the Switch Adapter. Adapter Main Cable Black-----------------------Black Red---------------------------Red Blue--------------------------Blue Green STEP 4 Insert the Adapter STEP 5 Align and insert the connector into the EAS Display Adapter Cable and...
- Page 4 Before moving to the next step, STEP 7 Plug the Display double check the connections Adapter Cable into the already and route the cables accordingly. installed display device HDMI Use the zip ties to fasten the cable. For more information cables in place.