Product Overview SF1000 The SF1000 is equipped with state-of-the-art fingerprint reader for secure and easy operation. This safe is great for personal use at home or office. One-touch fast and easier access will be helpful for extreme Situation.One removable shelf allow you to organize valuable items such as medicines, pistol, ammo, cash, Passport, jewelry, collections, keys, credit cards and important documents.
Safe Caution 1. Lock comes in default demo mode, any fingerprint or password will open the lock, use must first change default Master Pass code (MPC – 98989). User must have registered at least one admin before enrolling an ordinary user. 2.
I. Use Instructions Panel Description LED Indicator Fingerprint Collector Numpad / LED Indicator Key Hole Locking Key / Start Key / Enter Key Emergency Power Interface Precautions Figure 1 Lock comes in default demo mode, any fingerprint or password will open the lock, user must first change default Master Passcode (MPC: 98989).
Page 6
Verification mode Successful 1 Long Beep/ LED Flashes Green Access Mode Green LED flashes every second Admin (995~999) Failed 2 Short Beeps/ LED Flashes Red User ID Ordinary (001~994) Unlock with an Emergency Mechanical Key You can open the lock using an emergency mechanical key in case the electronic component does not operate. (1) Capping the tip of the tool into the lock flap at the bottom, a little f orce to pry open the lock cover.
II. The Basic Operation Change Press to activate lock Press Enter same Long beep Enter MPC [98989] Master Long press until you Enter new code again and green Press hear a long beep and LED 5-digit code Passcode Press flash light off Press Press...
Page 8
Enroll Enter same Press to activate lock Enter MPC or Verify Press Enter a 6~10 Long beep Ordinary password Long press until you Admin by Fingerprint / Enter User ID digits password and green again User hear a long beep and LED Password (001~994) Press...
Page 9
Ⅲ. Preparations before Installation Packing list Safebox Expansion screw Mechanical key Buckle Division plate Installation guide Name Quantity 2 keys+ Capping tool Recommended Installation Tools Spanner Percussion drill Ⅳ.Install the Safebox Structure Description Expansion bolt Expansion tube Gasket Split washer Screw nut Four mounting holes in the back panel Four mounting holes on the baseboard...
Page 10
Installation Procedure (1) Drill holes. Baseboard Back panel 257mm 257mm (2) Fix the expansion screw in the wall. Wall Wall Put expansion bolt and expansion tube together insert into the hole. Fit on gasket, split washer and screw nut. Tighten screw nut by spanner until the expansion tube is expanded, which makes expansion bolt fixed on the wall. Take out gasket, split washer and screw nut.
Page 11
Mount the safe box on the wall, then fit gasket, split washer and screw nut on the expansion bolt, then tighten screw nut by spanner to make the safe box fixed on the wall. Wall Wall Fix the safebox on the ground in the same way Ground Ground...
Install Division Plate. Fix two buckles with the same height on one side. Put division plate on the buckles with the angle of inclination. Fix two buckles with the same height on the other side, then down the division plate to make it horizontal. Ⅵ.
Need help?
Do you have a question about the SF1000 and is the answer not in the manual?
Questions and answers