Memory Operations - Sight Enhancement Systems SciPlus-2200 User Manual

Memory Operations
Note that some memory operations with the SciPlus-2200 use the soft keys A - D.
KEY NAME
Save Value to
RCL
Memory
STO
Recall Value from
RCL
Memory
STO
Display Memory
MEM
Soft Keys
BKSP
Soft keys A - D are used to clear the memory, swap the value in memory with the current line, and
perform simple arithmetic operations ( + - × ÷ ) on the value stored in memory using the current line.
Memory soft keys are shown on the opposite page. In this example, the value '15' resides in the current
line. Note that storing a value of '0' clears the memory.
Page 14 of 23
DESCRIPTION
Saves the current value into memory. If pressed at the end of an
expression, the expression is solved, and the result stored.
Enters 'RCL" as a variable in the current expression. When the
expression is evaluated, the value currently stored in memory is used.
To display the value currently in memory, simply enter RCL, followed
by .
↵
This key causes the memory soft keys to be displayed. Note that there
are two sets. Pressing this 2
second set of memory soft keys. A third time will disable the soft keys.
MEM a second time will bring up the
nd
version 1.6