Summary of Contents for Surcare SMF-V4
- Page 1 SANDER & MICROFINISHER SMF-V4 BEFORE YOU START OPERATING YOUR MACHINE BE SURE TO READ AND UNDERSTAND THE INFORMATION ENCLOSED ON THE SAFE AND PROPER USE OF THIS MACHINE SAFETY INSTRUCTIONS SPECIFICATIONS...
- Page 2 These checks should be done as a matter of safety as well as a matter of obtaining maximum performance and long machine life. It is recommended that a scheduled service be put in place (if not already) for the SMF-V4.
- Page 3 The SMF-V4 has been designed with a very efficient dust extraction system. This dust extraction system enables material that has been removed by the SMF-V4 from the surface being worked to be collected safely and disposed of appropriately.
- Page 4 Remove the Surcare – V4 from its box and stand in an upright position. Check to see that there has been no damage to the Surcare – V4 in transit. If there is damage to the Surcare – V4, contact supplier for replacement. Do not use machine that is damaged in any way.
- Page 5 4 abrasive discs of a different grade grit. The Surcare V4 is abrasive friendly and can take a variety of brands of abrasive discs, which can be purchased through your local suppliers or Surcare Australia.
- Page 6 SUGGESTED DIRECTIONAL METHOD OF USING THE SURCARE – V4 ON THE HORIZONTAL SURFACE BEING FINISHED. PLEASE NOTE SUGGESTED MINIMUM WIDTH OF SURFACE MATERIAL (DIAGRAM A).
-
Page 7: Operational Safety Procedures
OPERATIONAL SAFETY PROCEDURES Keep operational area clean and free of unnecessary clutter. Be sure the work environment around you is well-lit and free from materials that are combustible, such as paint thinners, lacquer thinners, adhesive solvents, petrol fumes, gas, and other materials which are or may be combustible. This is an electrical unit and like any other electrical power tool may produce electrical sparks when on/off switch is used, and during operation. - Page 8 Use only original Surcare replacement parts, accessories and attachments to ensure they have been tested for performance and safety.
- Page 9 Please contact us if you have any questions or comments. SURCARE AUSTRALIA No 9 Downey Street Alexandra 3714 Victoria Phone: +61 3 57723356 Fax: +61 3 57723359 Email: surcare@surcare.com Website: www.surcare.com...
Need help?
Do you have a question about the SMF-V4 and is the answer not in the manual?
Questions and answers