DStv Drifta USB User Quick Manual

Mobile Decoder
Quick Guide
Introduction
Welcome to the exciting world of DStv Mobile. With
your Drifta USB Mobile Decoder, you will be able to
connect to DVB-H broadcast mobile TV and have
access to DStv Mobile content live on your PC or
Mac.
This guide will help you connect the Drifta USB to
your PC or Mac so you can start watching right
away.
Page 1
Fold
The Drifta USB Mobile Decoder
I
ncluded with the Drifta USB device are a USB cable,
application CD and this quick guide.
2
Front
1
v1.1
Mobile Decoder
Quick Guide v1.0
Quick Guide Application CD
1. Antenna for receiving the DVB-H signal. This can be
extended and positioned vertically to improve
signal reception.
2. DVB-H signal light indicates the status of DVB-H
reception:
Signal Light Indications
STATUS
GREEN FAST FLICKERING
GREEN SLOW FLICKERING
GREEN STEADY
ORANGE STEADY
RED STEADY
3. Device Serial Number
4. CAS Number is used in conjunction with the Device
Serial Number when activating the device.
5. The USB cable allows you to extend the USB
connection.
Fold
Back
USB Cable
DESCRIPTION
BOOTING UP
SEARCHING FOR SIGNAL
READY TO CONNECT
FAILED TO FIND SIGNAL
ERROR NEEDS RESETTING
Connecting to a Windows PC
Requirements
• Operating System: Windows XP, Vista, 7, or 8 Desktop
• Processor: 32 or 64 Bit
• Minimum Memory: 512MB
• Minimum Disk Space: 100 MB
• Ports: USB Port
Installing the Application
Important: Do not connect the Drifta to the computer
before installing the application.
1. Insert the Drifta application CD and run the Windows
setup application.
2. Follow the steps and complete the installation.
Connecting to an Apple Mac
Requirements
• Mac OS X 10.6.8 or higher
• Minimum Processor: Intel Core 2 Duo
• Minimum Memory: 1 GB
• Minimum Disk Space: 100 MB
• Ports: USB Port
Installing the Application
Download the application from the Mac App store by
doing the following:
1. Using the App Store application on the Mac, search
for "Drifta".
2. A free application from MultiChoice called "Drifta"
will appear in the search results.
3. Install this application.