Advertisement
Charging
Attach the USB cable to the unit, and plug into any USB charger. If
the unit is completely discharged, it will take approximately 3 hours to
fully charge.
The red LED will illuminate during charging, when it has
completed, the red LED will turn off.
Note: There will be a beep when the battery is low and needs to be
recharged.
LED Status
Blue LED rapidly flashing or blue LED
Bluetooth Mode
solid
Blue LED slowly flashing
Aux Mode
Red LED solid
Charging
Troubleshooting
No sound output
Speaker needs to be connected/
re-paired to device
Tone every few seconds
Speaker needs to be charged
Speaker needs to be charged
Will not power on
Can't control from
Speaker needs to be in Bluetooth
mobile device
mode for full control
Unit distorts at
The devices' volume needs to
high volume
be lowered
Advertisement
