Table of Contents
Advertisement
How to Use the Product
1.
Insert and connect the charger to the product.
2.
Place the mobile device that support wireless charging function
on the cradle of the product. Charging begins when the product's
charging base and the mobile device's charging base comes in
contact.
3.
When charging is complete, separate the mobile device from the
product.
The supplied components are subject to change depending on
•
the manufacturer's circumstances.
As the components are exclusively made for this product, they
•
may not be compatible with other devices.
The product's appearance, specifications, etc. are subject to
•
change without notice for performance improvement.
Some mobile devices may not charge depending on the location
•
of the mobile devices' charging base.
Seamless charging may be difficult when thick cases are used.
•
Wireless charging function is not supported when wired charger
•
is connected to the mobile devices during wireless charging.
Please take caution to not place any metallic materials,
•
magnets, cards, etc. between the product and mobile devices. It
may interfere with normal charging or cause overheating and
malfunction.
When the red light is blinking, charge after removing metallic
•
materials on top of the charging base.
Make sure to only use adapters that are compatible with the
•
product's specifications.
(ex. Phone adapters certified by international standards)
Advertisement
Table of Contents
