Advertisement
Quick Links
Advertisement
Summary of Contents for Joan C50
- Page 1 Mobile Data Collection Terminal Quick Guide...
- Page 2 Overview SCAN WINDOW EARPIECE CAMERA CARD COVER SCAN SCAN VOLUME+ POWER VOLUME- NFC & ID CARD SENSING MEMU RETURN LANYARD HOLE SPEAKER HOME DATA INTERFACE...
-
Page 3: Install Sim Card
Install SIM card Use the card cover and the bottom cover to release the cover, as shown below... - Page 4 Install SIM card Please press the view to select the corresponding slot to insert the SIM card, as follows...
- Page 5 Double Card Specification Your device use the design“double SIM card double standby ” The two SIM cards unable to use voice and data service at the same time. • If one SIM card is dialing then the other one unable to answer the phone. You may hear“the phone you call is out of service and please call later”...
- Page 6 Connect to WLAN network 一、Connect to WLAN network 1.Slide down the status bar and open the notification panel. 2.Click on the switch page and press long to enter the WLAN setting interface. 3.Open WLAN switch, The device will show the detected the WLAN network on a list.
- Page 7 Instructions on the Bluetooth 1.Click on device Bluetooth setting, Select“open”,Bluetooth support function is available. 2.Bluetooth headset ,Press headset multifunction function more than 3 second s until the indicator lights up（pay more attention the indicator light should be li ght up steady not blink or not bright. Or some of them set is for the red and ue flashing）...
-
Page 8: Online Upgrade
Online Upgrade We have equipped you with an online upgrade function. You can get the latest and most stable system through online upgrade. The operation method is as follows: 1. Click main menu and enter APP menu interface 2. Click on the settings icon to enter the settings interface, click on the "About phone"... -
Page 9: Barcode Scanning
Barcode Scanning If your device is equipped with a barcode scanning function, please follow the instructions below to support 1D and 2D barcode scanning recognition Click main menu and enter APP menu interface Click JSCAN enter scan function setting, see picture JSCAN function description &... - Page 10 4. Device trigger scan, see photo: 4.0.1 The device scan side button is divided into two sides, can trigger the scan 4.0.2 According to the bar code different size specifications to determine the scanning distance, such as 18mm * 18mm specifications of the two-dimensional code, the best scanning distance 15-30cm 4.0.3 Scan angle: ±72, front and rear: ±72, swivel 360°...
- Page 12 NFC Read Function If your device is equipped with an NFC read function, follow the instructions below 1. Click the main menu button to enter the APP menu interface 2. Click on the settings icon to enter the settings interface, click on the "more" option, Then click to select "NFC"...
- Page 13 1. What should I do if the device does not boot? (1) When the power button is pressed for 3-4 seconds, the screen will start to display. Press the power button to release the power button when the screen is displayed. (2) Next, check if the device has power and connect it to the USB cable of the device.
- Page 14 FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.