Do you have a question about the 9049 and is the answer not in the manual?
Questions and answers
Subscribe to Our Youtube Channel
Summary of Contents for Spectre Performance 9049
Page 1
Intake Installation Instructions P/N 9049 (red filter) - P/N 9049B (blue filter) P/N 9049K (black filter) Year/Make/Model/Engine 2015-16 Chrysler 200 3.6L Parts List For filter reorders ask at the 1- Intake tube special order counter of your 1- Heatshield local parts store or call:...
Page 2
Step 1 Safety first! Before you begin the installation, make sure that the vehicle is in park (or neutral for a manual transmission) with the parking brake set. Disconnect the negative battery terminal and verify that all components that are listed are present. Note: This kit was designed and tested on a stock engine without any custom tuning done to the engine computer.
Page 3
Step 8 Step 7 Install the intake tube into the hole in the heat shield. Install the intake Install the provided coupler on to assembly into the vehicle as shown while making sure the plastic mounts the vehicle as shown. capture into the locating grommets.
Need help?
Do you have a question about the 9049 and is the answer not in the manual?
Questions and answers