Product Information - Newmac NM-75K Operating Instructions Manual

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or
maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in
personal injury and/or property damage! Retain instructions for future reference.
Description
Models NM-75K, NM-125K, NM-175K, NM-215K heaters are 75,000 to 210,000btu/hr heaters. These heaters use
1-K Kerosene for combustion, and electricity to run the fan. It is primarily intended for temporary heating of well
ventilated buildings under construction, alteration, or repair. This heater may be used in agricultural, industrial and
commercial environments.
Unpacking
1. Remove all packing items applied to heater for shipment.
2. Remove all items from carton.
3. Check all items for shipping damage. If heater is damaged, promptly inform dealer where you purchased
heater.
Introduction
Please read this USER'S MANUAL carefully. It will show you how to assemble, maintain and operate this heater
safely and efficiently to obtain the full benefits of its many features.
Consumer
Save these instructions for future reference
DIMENSIONS
NM-75K
H 15.9 inch (405 mm) 26.4 inch (670 mm)
W 11.8 inch (300 mm) 21.5 inch (545 mm)
L 29.1 inch (740 mm) 35.2 inch (893 mm) 39.5 inch (1003 mm)
H

Product Information

Specification
NM-125K NM-175K / NM-215K
25 inch (635 mm)
23.2 inch (590 mm)
L
L
Model NM-125K, NM-175K, NM-215K
H
Model NM-75K
W
W