Download Print this page

NICOR MAXCOR NSSLR-1-3-14-56-W Installation Instructions

5" & 6" recessed led downlight

Advertisement

Quick Links

5" & 6" Recessed LED Downlight
NICOR, Inc. 2200 Midtown Place NE, Albuquerque, NM 87107 P: 800.821.6283 F: 800.892.8393
!
WARNING
Risk of Fire or Shock. LED Retrofit Kit installation requires knowledge of luminaires electrical systems. If not
qualified, do not attempt installation. Contact a qualified electrician.
Risk of Fire or Shock: Supply conductors (power wiring) connecting the fixture must be rated minimum 90
uncertain, consult an electrician.
Risk of Electric Shock: Disconnect power at fuse of circuit breaker before installing or servicing.
Risk of Fire or Electric Shock: Install this kit only in the luminaires that has the constructions features and
dimensions shown in the photographs and/or drawings.
Risk of Fire or Electric Shock: Do not make or alter any open holes in an enclosure of wiring or electrical
components during kit installation.
Risk of Fire or Electric Shock: Do not alter, relocate, or remove wiring, lampholders, power supply, or any other
electrical component.
Risk of Fire or Electric Shock: To prevent wiring damage or abrasion, do not expose wiring to edges of sheet
metal or other sharp objects.
CAUTION: To avoid possible electric shock, be sure that power supply is turned off at fuse box or circuit breaker
before attempting installation or servicing of the fixture. For safest operation read and become familiar with
complete installation instructions prior to use.
Compatible Housings
NICOR's MAXCOR 5" and 6" Recessed LED Downlight will work with most 5 inch and 6 inch housings. The
MAXCOR 5" & 6" Recessed LED Downlight has a built in trim and does not require any additional trim. Use
in recessed housings with no open holes.
This LED retrofit kit is intended for installing in the field in
recessed type IC luminaires with dimensions outlined in the
installation instructions.
Minimum height for 6 inch cans is 7.5 in. (19cm). Minimum
height for 5 inch cans is 7.75 in. (19.6cm).
Suitable for wet locations in covered ceiling mount luminaires.
The retrofit kit is accepted as a component of a luminaire
where the suitability of the combination shall be determined by
CSA of authorities having jurisdiction.
For a selection of NICOR Housings, please visit our website:
www.nicorlighting.com
NICOR, Inc. 2200 Midtown Place NE, Albuquerque, NM 87107 P: 800.821.6283 F: 800.892.8393
Installation Instructions for the MAXCOR
5" & 6" Recessed LED Downlight
Model# NSSLR-1-3-14-56-W
Torsion spring
7.5in (190.5mm)
MAXCOR 5" & 6" Recessed LED Downlight
C. If
0
3.78in
(96mm)
Doc. Rev. 8-11

Advertisement

loading

Summary of Contents for NICOR MAXCOR NSSLR-1-3-14-56-W

  • Page 1 Compatible Housings NICOR’s MAXCOR 5” and 6” Recessed LED Downlight will work with most 5 inch and 6 inch housings. The MAXCOR 5” & 6” Recessed LED Downlight has a built in trim and does not require any additional trim. Use in recessed housings with no open holes.
  • Page 2 Step 2. Remove socket from plate and discard plate. Attach retro-fit sticker to inside of housing. Step 3. Screw Edison base into socket in recessed housing. (Fig. 2) NICOR, Inc. 2200 Midtown Place NE, Albuquerque, NM 87107 P: 800.821.6283 F: 800.892.8393 Doc. Rev. 8-11...
  • Page 3 6” Housing = 7.5in (19cm.) Warranty NICOR offers a 5 year limited warranty which applies only to NICOR manufactured LED housings, LED Modules, and LED Trims. A qualified electrician must ensure compatibility of use with a particular housing; this includes all applicable national and local electrical and building codes. NICOR recommends that only qualified persons install this product.