Table of Contents
Advertisement
OVER-HEAT PROTECTION SENSOR
This heater is equipped with an over-heat protecting system to check the unusual over heating which may occur
in combustion. Over-heating protection device senses and send error signal to the dashboard when temperature
in the heater (except combustion chamber) is over 176- 212 °F.
TEMPERATURE CONTROL FUNCTION
This unit is equipped with a temperature control knob. Use the temperature control knob to set the unit to a
desired temperature. When the room temperature reaches the specified temperature setting of the control
knob, the heater will automatically shut off. This unit will not begin heating if the preset temperature is lower than
the current room temperature.
Open the box and check the heater, parts and user manual. Refer to the figure for the contents.
Caution: Do not throw away the box and packing, keep it for storing this unit.
Packing Box
Wheel Assembly
Wheel Fixing
Piece
Shaft
Unpacking
User Manual
-5-
Ventilation Pipe
Advertisement
Table of Contents
