Advertisement
Fibre Channel Loops 0-5 Status LEDs
Front Panel Status LEDs
(solid) Reference video is not connected
Dark Blue
( solid) Reference video is connected
Light Blue
Black
File system initialization not complete
(solid) File system ( FS) started, read -only
Dark Blue
(blink) FS present but halted
(solid) FS started, read -write
Light Blue
(blink) No FS present
z
Black
RAID system initialization not complete
Green
( solid) rebuild ( s) in progress
Green
( solid) one or more RAID sets unprotected
Dark Blue
( blink) RAID sets present, no FS running
Light Blue
( solid) All RAID sets are protected
( blink) FS not viable to start
Omneon Technical Support: 888 686-7781 (Americas), +65 6542 0050 (Asia Pacific), + 44 1256 347 401 (EMEA), +1 408 585-5200 (Other)
FIBRE
CHANNEL
Yellow = 1 Gbps
Green = 4 Gbps
● All LEDs on /off = Fibre Channel loop is disabled
● All LEDs blinking in sequence = Fault
● All LEDs blinking together = No connection, or the speed is
misconfigured
Reference
File System
RAID
Green = 2 Gbps
Ethernet initialization incomplete
Black
Dark Blue
(blink) Ethernet hardware
or software failure
Light Blue
(blink) Ethernet communication problem
on at least one port
(solid) Ethernet communications OK
Host 0-3
across all ports, IP addresses present
Unused
Fibre Channel
( solid) disks present, FS running, EFS
Dark Blue
(blink ) F/C initialization in progress
(solid ) disks present, FS running, no EFS
Light Blue
(blink ) F/C initialization complete, FS in
progress
Green/
(solid ) F/C driver shut down
Yellow
(blink ) internal failure detected
28-0202 Rev. D
Advertisement
