Advertisement
Table of Contents
Stat-Alert Signaling Module Kit
Field Installation Kit Instructions
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information that is confidential and proprietary to GAI-Tronics.
GAI-Tronics retains all intellectual property and other rights in or to the information contained herein,
and such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.
General Information
The Model TDN9413A Stat-Alert Signaling Module Kit is intended for upgrading existing dispatch
consoles manufactured by GAI-Tronics or for replacement of existing Stat-Alert modules. This kit
includes the following components:
Qty
Description
1
MDC-1200 Interface Module
1
Module mounting bracket
1 lot
Hardware and labels
Installation
Desktop Console
1. Disconnect power from the Desktop Console and remove all attached cables from the rear cover.
2. Remove the four screws securing the rear panel. Gently pull the rear cover from the housing and
disconnect the ribbon cables (SLV-CBL-P) attached to the surge suppression PCBA. Lay the rear
panel flat. See Figure 1.
GAI-Tronics Corporation 400 E. Wyomissing Ave. Mohnton, PA 19540 USA
610-777-1374
V
ISIT WWW
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
Model TDN9413A
800-492-1212
.
-
.
GAI
TRONICS
COM FOR PRODUCT LITERATURE AND MANUALS
Pub. 43003-040A
Fax: 610-796-5954
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for GAI-Tronics MDC-1200
Summary of Contents for GAI-Tronics MDC-1200
-
Page 1: General Information
GAI-Tronics retains all intellectual property and other rights in or to the information contained herein, and such information may only be used in connection with the operation of your GAI-Tronics product or system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any third party. - Page 2 Pub. 43003-040A Model TDN9413A Stat-Alert Signaling Module Kit Page: 2 of 3 Figure 1. 3. Remove the seven screws securing the top panel and gently lift the cover exposing the attached speaker cable and master display cable. See Figure 2. Figure 2.
- Page 3 Pub. 43003-040A Model TDN9413A Stat-Alert Signaling Module Kit Page: 3 of 3 5. Remove the four screws attaching the mounting plate to the base. This allows you to remove the mounting plate giving access to the main control PCBA. See Figure 2. 6.
Need help?
Do you have a question about the MDC-1200 and is the answer not in the manual?
Questions and answers