Advertisement
SRL – SRD Instruction Manual
All synthetic material must be protected from slag, hot sparks, open flames, or other heat
sources. The use of heat resistant materials is recommended in these applications.
Connector Compatibility Limitations
Malta Dynamics equipment must be coupled only to compatible connectors that are suitable to
your application. Ensure all connections are compatible in size, shape and strength. Ensure all
connectors are fully closed and locked. OSHA 29 CFR 1926.502 prohibits the use of snap
hooks to engage to objects unless the following requirements are met:
Snap hook must be a locking type snap hook.
Snap hook must be explicitly designed for such a connection. "Designed for" means that the
manufacturer of the snap hook specifically created the snap hook to be used to connect to
the equipment in question.
Use of a non-locking snap hook can result in rollout (a process by which a snap hook or
carabiner unintentionally disengages from another connector or object to which it is coupled.
ANSI Z359.0- 2007).
Malta Dynamics connectors (snap hooks and carabiners) are designed to
be used only as specified in each product's user's instructions.
Avoid the following types of connections:
Connection of two (or more) snap hooks or carabiners to one D-ring.
Connection of a snap hook back to its integral lanyard.
Direct connection of a snap hook to horizontal lifeline.
Connection in a manner that results in a load on the gate. NOTE: Large throat opening snap
hooks should not be connected to standard size D-rings or similar objects, as such use will
result in a load on the gate if the hook or D-ring twists or rotates. Large throat snap hooks
are designed for use on structural elements such as rebar or cross members that are not
shaped in such a way that they may capture the gate of the hook.
False engagement connections, where protruding features of the snap hook or carabiner
may catch on the anchor and seem to be fully engaged to the anchor point. Always confirm
engagement.
Connection to snap hooks or carabiners.
Direct connection to webbing lanyard, webbing loop, rope lanyard or tie-back (unless the
manufacturer's instructions for both the lanyard and connector specifically allow such a
connection).
Connection of a snap hook to a D-ring, rebar, or other connection point of improper
dimensions in relation to the snap hook dimensions or configurations that could cause the
snap hook keeper to be depressed by a turning motion of the snap hook, or such that
hook or carabiner will not fully close and lock, or that roll-out could occur.
Illustration 2 depicts examples of inappropriate connections:
Illustration 2: Inappropriate Connections
4
4
SRL – SRD Instruction Manual
SELF-RETRACTING LIFELINES - INSTRUCTION MANUAL
THESE INSTUCTIONS APPLY TO THE FOLLOWING MODEL(S):
C7000
C7001
C7005
C7020
C7103
C7201
SRL -Weight:-5-lbs.
Materials: -Impact -Resistant-Polymer
Housing,-Steel-Cable,-Steel-Hardware
CLASS B SRD
Max-Arresting-Distance:-54-in.
Working-Load: -130-310-lbs.
Capacity:-1-Person
Average-Arresting-Force:-900-lbs.
MaltaDynamics.com
800-494-1840
405 Watertown Road, Waterford, OH 45786
Materials: -Impact -Resistant-Polymer
Housing,-Steel-Cable,-Steel-Hardware
CLASS B SRD
Max-Arresting-Distance:-54-in.
snap
Working-Load: -130-310-lbs.
This manual must be read and understood in its entirety and used as part of your fall protection training program
Capacity:-1-Person
Average-Arresting-Force:-900-lbs.
as required by OSHA 1926 and State and local regulatory agencies. Thisinstruction manual is intended to meet
industry standards required by and ANSI Z359.2007 and should be usedas part of an Employee Fall Safety
training program as required by OSHA. User must read and fully understand the limitations and proper use of the
equipment, and be properly trained by employer prior to use per OSHA 29 CFR 1910.66, 29 CFR 1926.503, and
applicable local standards.
equipment. Current User Instruction Manuals must always be available to the user. Read and understand these
instructions before using equipment. Do not discard these instructions.
Mis
1
PART# C7202
™
C7002
C7003
C7004
C7021
C7100
C7102
C7202
C8000
C8001
MIN. 5000 lbs
22kN
11' Polyester Webbing, Swivel Top with
Carabiner; Universal Rebar Hook on Bottom
Capacity:-1-person
Working -Load:-130-310-lbs.
GREEN
RED
Max -Arresting-Distance:-54-in.
310lbs
Average -Arresting-Force:
900-lbs.
Max
Materials:-
Impact
-Resistant-Polymer-Housing,-
------------
Polyester-Webbing,-Steel-Hardware
800-494-1840
405 Watertown Road, Waterford, OH 45786
Class -B -SRD
MIN. 5000 lbs
22kN
40
o
54
o
C
GREEN
RED
-40
o
C
310lbs
Max
800-494-1840
405 Watertown Road, Waterford, OH 45786
3/16" diameter
Galvanized Steel Cable
with Carabiner, Swivel Top
Steel Snap Hook & Tag Line
MIN. 5000 lbs
22kN
40
o
max
NOTE: This User Instruction Manual is not to be removed except by the user of this
GREEN
RED
54
o
C
130
F
o
310lbs
-40
C
o
-40
F
o
Max
800-494-1840
405 Watertown Road, Waterford, OH 45786
ail
w w
ing , in
ion
his
ip
m
in
io
p
i
i
i
b
p
,
p rvi
Malta Dynamics.
C7202
™
40
o
max
follow
instructions
SUITABLE FOR
54
o
C
130
o
F
proper
for
HORIZONTAL
SRL
LIFELINE
o
-40
o
F
-40
C
attachment
C8000
max
SUITABLE FOR
HORIZONTAL
LIFELINE
follow
instructions
130
F
o
proper
for
SRL
-40
o
F
attachment
0120
EN 360:2002
C8001
SUITABLE FOR
HORIZONTAL
LIFELINE
follow
instructions
for
proper
SRL
attachment
imit ion
h
h.
13
Ma
Materials
Advertisement
